aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2018-12-27 02:32:38 +0100
committerChristian Lamparter <chunkeey@gmail.com>2018-12-27 14:06:38 +0100
commit1724d4e9ed7716a5444eca42adf045c2f3afc554 (patch)
tree633979e9b4ba8d4ca6693c06ac8aae889c6d3a49 /target/linux/ath79/generic
parent8471944325db80ca37f7c756130070d0add58ff6 (diff)
downloadupstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.tar.gz
upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.tar.bz2
upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.zip
ath79: add support for devolo WiFi pro 1200e
Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 2T2R WiFi5: QCA9880 2T2R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic')
-rw-r--r--target/linux/ath79/generic/config-default3
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/config-default b/target/linux/ath79/generic/config-default
index b2194a4132..fddcb1d704 100644
--- a/target/linux/ath79/generic/config-default
+++ b/target/linux/ath79/generic/config-default
@@ -1,5 +1,7 @@
CONFIG_AT803X_PHY=y
CONFIG_BLK_MQ_PCI=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_IP17XX_PHY=y
CONFIG_LEDS_RESET=y
@@ -23,3 +25,4 @@ CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367_PHY=y
+CONFIG_WATCHDOG_CORE=y