aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-05-19 22:49:35 +0200
committerDavid Bauer <mail@david-bauer.net>2020-05-22 21:54:30 +0200
commitebddc5f984a240980303aed68524eb615484eef8 (patch)
treef8eacc7f4ea3b557fa3163119e9c5bedcbdcf795 /target/linux/ath79/generic
parenta9f75101508f64306710590bf45a326d4c2a1970 (diff)
downloadupstream-ebddc5f984a240980303aed68524eb615484eef8.tar.gz
upstream-ebddc5f984a240980303aed68524eb615484eef8.tar.bz2
upstream-ebddc5f984a240980303aed68524eb615484eef8.zip
ath79: add support for Enterasys WS-AP3705i
Hardware -------- SoC: Atheros AR9344 RAM: 128M DDR2 FLASH: 2x Macronix MX25L12845EM 2x 16MiB SPI-NOR WLAN2: Atheros AR9344 2x2 2T2R WLAN5: Atheros AR9580 2x2 2T2R SERIAL: Cisco-RJ45 on the back (115200 8n1) Installation ------------ The U-Boot CLI is password protected (using the same credentials as the OS). Default is admin/new2day. 1. Download the OpenWrt initramfs-image. Place it into a TFTP server root directory and rename it to 1401A8C0.img. Configure the TFTP server to listen at 192.168.1.66/24. 2. Connect the TFTP server to the access point. 3. Connect to the serial console of the access point. Attach power and interrupt the boot procedure when prompted (bootdelay is 1 second). 4. Configure the U-Boot environment for booting OpenWrt from Ram and flash: $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000' $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66; tftpboot 0x85000000; bootm' $ setenv bootcmd 'run boot_openwrt' $ saveenv 5. Load OpenWrt into memory: $ run ramboot_openwrt Wait for the image to boot. 6. Transfer the OpenWrt sysupgrade image to the device. Write the image to flash using sysupgrade: $ sysupgrade -n /path/to/openwrt-sysuograde.bin Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic')
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom8
-rw-r--r--target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh3
4 files changed, 17 insertions, 1 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index a3c5b3f988..4774d5daf2 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -95,7 +95,8 @@ comfast,cf-ew72)
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
;;
comfast,cf-wr752ac-v1|\
-engenius,ecb1750)
+engenius,ecb1750|\
+enterasys,ws-ap3705i)
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
;;
devolo,magic-2-wifi)
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 0b05868baf..a99d5f6532 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -22,6 +22,7 @@ ath79_setup_interfaces()
devolo,dvl1750x|\
dlink,dir-505|\
engenius,ecb1750|\
+ enterasys,ws-ap3705i|\
glinet,gl-ar300m-lite|\
netgear,ex6400|\
netgear,ex7300|\
@@ -400,6 +401,9 @@ ath79_setup_macs()
ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
;;
+ enterasys,ws-ap3705i)
+ label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
+ ;;
iodata,etg3-r)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" -1)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 428b502d81..e0fa5ff354 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -43,6 +43,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
;;
+ enterasys,ws-ap3705i)
+ caldata_extract "calibrate" 0x1000 0x440
+ ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
+ ;;
nec,wg800hp)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
@@ -72,6 +76,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x440
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
;;
+ enterasys,ws-ap3705i)
+ caldata_extract "calibrate" 0x5000 0x440
+ ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
+ ;;
ocedo,raccoon|\
tplink,tl-wdr3500-v1|\
tplink,tl-wdr3600-v1|\
diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
index b3c3de298e..da1583a825 100644
--- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -8,6 +8,9 @@ preinit_set_mac_address() {
avm,fritz450e)
ip link set dev eth0 address $(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
;;
+ enterasys,ws-ap3705i)
+ ip link set dev eth0 address $(mtd_get_mac_ascii u-boot-env0 ethaddr)
+ ;;
siemens,ws-ap3610)
ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr)
;;