aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic/config-default
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-02-08 12:58:25 +0100
committerDavid Bauer <mail@david-bauer.net>2020-02-16 15:36:29 +0100
commitd2b8ccb1c04def81224da6f42f644c7d239b9986 (patch)
tree29ba990cb0f9f2e38ff97484a221ce94a9f511f8 /target/linux/ath79/generic/config-default
parentae35ff576764fb68b84fcac070e5d2b1ccb4966d (diff)
downloadupstream-d2b8ccb1c04def81224da6f42f644c7d239b9986.tar.gz
upstream-d2b8ccb1c04def81224da6f42f644c7d239b9986.tar.bz2
upstream-d2b8ccb1c04def81224da6f42f644c7d239b9986.zip
ath79: add support for Siemens WS-AP3610
Hardware -------- SoC: Atheros AR7161 RAM: Samsung K4H511638D-UCCC 2x 64M DDR1 SPI: Micron M25P128 (16M) WiFi: Atheros AR9160 bgn Atheros AR9160 an ETH: Broadcom BCM5481 LED: Power (Green/Red) ETH (Green / Blue / Yellow) (PHY-controlled) WiFi 5 (Green / Blue) WiFi 2 (Green / Blue) BTN: Reset Serial: Cisco-Style RJ45 - 115200 8N1 Installation ------------ 1. Download the OpenWrt initramfs-image. Place it into a TFTP server root directory and rename it to 1401A8C0.img. Configure the TFTP server to listen at 192.168.1.66/24. 2. Connect the TFTP server to the access point. 3. Connect to the serial console of the access point. Attach power and interrupt the boot procedure when prompted (bootdelay is 1 second). 4. Configure the U-Boot environment for booting OpenWrt from Ram and flash: $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf080000' $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66; tftpboot; bootm' $ saveenv 5. Load OpenWrt into memory: $ run ramboot_openwrt Wait for the image to boot. 6. Transfer the OpenWrt sysupgrade image to the device. Write the image to flash using sysupgrade: $ sysupgrade -n /path/to/openwrt-sysuograde.bin Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic/config-default')
-rw-r--r--target/linux/ath79/generic/config-default1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/config-default b/target/linux/ath79/generic/config-default
index 2d8f7f20c2..6cd1518e3a 100644
--- a/target/linux/ath79/generic/config-default
+++ b/target/linux/ath79/generic/config-default
@@ -1,4 +1,5 @@
CONFIG_AT803X_PHY=y
+CONFIG_BROADCOM_PHY=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_INTEL_XWAY_PHY=y