diff options
| author | Saiful Islam <si87868@gmail.com> | 2021-09-25 07:39:52 +0600 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-07 00:03:27 +0100 |
| commit | 43ec6d64bb368253f159ec9e6d8343fdbb0d97e4 (patch) | |
| tree | d1f41bc1432ce47996305c71fc5d1681b6ad25ed /target/linux/ath79/generic/base-files | |
| parent | 8de901ccf7e2b227bd970e9c477f00c15ce6aae9 (diff) | |
| download | upstream-43ec6d64bb368253f159ec9e6d8343fdbb0d97e4.tar.gz upstream-43ec6d64bb368253f159ec9e6d8343fdbb0d97e4.tar.bz2 upstream-43ec6d64bb368253f159ec9e6d8343fdbb0d97e4.zip | |
ath79: add support for TP-Link TL-WR841HP v2
Specifications:
- AR9344 SoC, 8 MB nor flash, 64 MB DDR2 RAM
- 2x2 9dBi antenna, wifi 2.4Ghz 300Mbps
- 4x Ethernet LAN 10/100, 1x Ethernet WAN 10/100
- 1x WAN, 4x LAN, Wifi, PWR, WPS, SYSTEM Leds
- Reset/WPS button
- Serial UART at J4 onboard: 3.3v GND RX TX, 1152008N1
MAC addresses as verified by OEM firmware:
vendor OpenWrt address
LAN eth0 label
WAN eth1 label + 1
WLAN phy0 label
The label MAC address was found in u-boot 0x1fc00.
Installation:
To install openwrt,
- set the device's SSID to each of the following lines,
making sure to include the backticks.
- set the ssid and click save between each line.
`echo "httpd -k"> /tmp/s`
`echo "sleep 10">> /tmp/s`
`echo "httpd -r&">> /tmp/s`
`echo "sleep 10">> /tmp/s`
`echo "httpd -k">> /tmp/s`
`echo "sleep 10">> /tmp/s`
`echo "httpd -f">> /tmp/s`
`sh /tmp/s`
- Now, wait 60 sec.
- After the reboot sequence, the router may have fallen back to
its default IP address with the default credentials (admin:admin).
- Log in to the web interface and go the the firmware upload page.
Select "openwrt-ath79-generic-tplink_tl-wr841hp-v2-squashfs-factory.bin"
and you're done : the system now accepts the openwrt.
Forum support topic:
https://forum.openwrt.org/t/support-for-tplink-tl-wr841hp-v2/69445/
Signed-off-by: Saiful Islam <si87868@gmail.com>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 1 | ||||
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/board.d/02_network | 1 |
2 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 03750856ab..c8717ce0cc 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -396,6 +396,7 @@ tplink,tl-wpa8630p-v2.0-eu|\ tplink,tl-wpa8630p-v2.1-eu) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" ;; +tplink,tl-wr841hp-v2|\ tplink,tl-wr842n-v2) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x04" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 54c4152757..83e74f0651 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -441,6 +441,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" ;; + tplink,tl-wr841hp-v2|\ tplink,tl-wr842n-v2|\ tplink,tl-wr941hp-v1) ucidef_set_interface_wan "eth1" |