diff options
| author | Robert Balas <balasr@iis.ee.ethz.ch> | 2021-09-02 17:07:14 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-09-05 23:52:35 +0200 |
| commit | baacdd53dfd1daf3d4fada8921a46a562e4520e2 (patch) | |
| tree | 62bc44e8eadda66e52cae7b264eb32dbb3c0ff58 /target/linux/ath79/generic/base-files | |
| parent | f78ad901e1ce07c42a9f5e670c39dbdcea15eb87 (diff) | |
| download | upstream-baacdd53dfd1daf3d4fada8921a46a562e4520e2.tar.gz upstream-baacdd53dfd1daf3d4fada8921a46a562e4520e2.tar.bz2 upstream-baacdd53dfd1daf3d4fada8921a46a562e4520e2.zip | |
ath79: add support for TP-Link TL-WA1201 v2
This device is a wireless access point working on the 2.4 GHz and 5 GHz
band, based on Qualcomm/Atheros QCA9563 + QCA9886.
Specification
- 775 MHz CPU
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- QCA9563: 2.4 GHz 3x3
- QCA9886: 5 GHz
- AR8033: 1x 1 Gbs Ethernet
- 4x LED, WPS factory reset and power button
- bare UART on PCB (accessible through testpoints)
Methods for Flashing:
- Apply factory image in OEM firmware web-gui. Wait a minute after the
progress bar completes and restart the device.
- Sysupgrade on top of existing OpenWRT image
- Solder wires onto UART testpoints and attach a terminal.
Boot the device and press enter to enter u-boot's menu. Then issue the
following commands
1. setenv serverip your-server-ip
setenv ipaddr your-device-ip
2. tftp 0x80060000 openwrt-squashfs.bin (Rembember output of size in
hex, henceforth "sizeinhex")
3. erase 0x9f030000 +"sizeinhex"
4. cp.b 0x80060000 0x9f030000 0x"sizeinhex"
5. reboot
Recover:
- U-boot serial console
Signed-off-by: Robert Balas <balasr@iis.ee.ethz.ch>
[convert to nvmem]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 8715a57213..ffc6f3086e 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -19,7 +19,8 @@ glinet,gl-ar300m-lite|\ glinet,gl-ar300m16|\ pcs,cap324|\ tplink,cpe610-v1|\ -tplink,cpe610-v2) +tplink,cpe610-v2|\ +tplink,tl-wa1201-v2) ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" ;; alfa-network,n2q) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 9cec8d5098..e2c6f9feac 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -72,6 +72,7 @@ ath79_setup_interfaces() tplink,re450-v2|\ tplink,re450-v3|\ tplink,re455-v1|\ + tplink,tl-wa1201-v2|\ tplink,tl-wr902ac-v1|\ ubnt,bullet-ac|\ ubnt,bullet-m-ar7240|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a01cd9f6f8..5ba1a7a8ff 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -229,7 +229,8 @@ case "$FIRMWARE" in tplink,archer-c60-v2|\ tplink,archer-c60-v3|\ tplink,archer-c6-v2|\ - tplink,archer-c6-v2-us) + tplink,archer-c6-v2-us|\ + tplink,tl-wa1201-v2) caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ |