aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic/base-files
diff options
context:
space:
mode:
authorTobias Schramm <tobleminer@gmail.com>2019-12-03 22:48:35 +0100
committerDavid Bauer <mail@david-bauer.net>2020-01-12 14:12:50 +0100
commitb6946542f85014096c08f58c3c0acbbfe623a734 (patch)
tree1725cdbaa008531b580858a28954971f3296529c /target/linux/ath79/generic/base-files
parent313bde53ce944e9fa67699173cf3be233afa4c49 (diff)
downloadupstream-b6946542f85014096c08f58c3c0acbbfe623a734.tar.gz
upstream-b6946542f85014096c08f58c3c0acbbfe623a734.tar.bz2
upstream-b6946542f85014096c08f58c3c0acbbfe623a734.zip
ath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP
Flash: 8 MB RAM: 64 MB SoC: AR7242 Switch: bcm53128 USB: 1x USB 2.0 Ethernet: 8x GbE, 1x FE The Ubiquiti ToughSwitch 8XP is a 8-port PoE Gigabit switch with a single Fast-Ethernet management port. It supports both 24V passive PoE and 48V 802.11af/at PoE out on all eight ports. By default the single Fast-Ethernet port labeled "MGMT" is configured as the WAN port. Thus access to the device is only possible via the eight switch ports. Installation of the firware is possible either via serial + tftpboot or the factory firmware update function via webinterface. Serial: 3v3 115200 8n1 The serial header is located in the lower left corner of the switches PCB: | | | | o | o RX | o TX | o GND | | ++ +-++-+ ++ ++ + +--+ ++ +--++--++--+ Signed-off-by: Tobias Schramm <tobleminer@gmail.com> [fix whitespace issue] Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network5
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index b1b40087ef..ae857b1771 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -259,6 +259,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
;;
+ ubnt,edgeswitch-8xp)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:lan:5" "5:lan:6" "6:lan:7" "7:lan:8" "8@eth0"
+ ;;
ubnt,routerstation-pro)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \