diff options
| author | David Bauer <mail@david-bauer.net> | 2020-04-14 03:58:37 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2020-04-19 16:45:40 +0200 |
| commit | 8d9c1087e4d07d625a9fef61d5dce71d850732ae (patch) | |
| tree | 78f125291c0085a570dd288decce08bd2927a7f7 /target/linux/ath79/generic/base-files | |
| parent | 45e2b7763f2a846bf1a40f5fa79b4cfe4678557a (diff) | |
| download | upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.tar.gz upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.tar.bz2 upstream-8d9c1087e4d07d625a9fef61d5dce71d850732ae.zip | |
ath79: add support for AVM FRITZ!WLAN Repeater 450E
SOC: Qualcomm QCA9556 (Scorpion) 560MHz MIPS74Kc
RAM: 64MB Zentel A3R12E40CBF DDR2
FLASH: 16MiB Winbond W25Q128 SPI NOR
WLAN1: QCA9556 2.4 GHz 802.11b/g/n 3x3
INPUT: WPS button
LED: Power, WiFi, LAN, RSSI indicator
Serial: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 192.168.178.1. Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes.
You need to powercycle the device afterwards to boot OpenWRT.
Tested-by: Andreas Ziegler <dev@andreas-ziegler.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
4 files changed, 8 insertions, 4 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index b57f4cdd8e..ca4bb3dd33 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -12,7 +12,8 @@ case "$board" in ucidef_set_led_netdev "lan" "LAN" "$boardname:orange:eth0" "eth0" ucidef_set_led_switch "wan" "WAN" "$boardname:orange:eth1" "switch0" "0x04" ;; -alfa-network,ap121f) +alfa-network,ap121f|\ +avm,fritz450e) ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" ;; avm,fritz1750e) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 96800d771f..543543ad54 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -338,7 +338,8 @@ ath79_setup_macs() alfa-network,ap121f) label_mac=$(mtd_get_mac_binary art 0x1002) ;; - avm,fritz1750e) + avm,fritz1750e|\ + avm,fritz450e) label_mac=$(fritz_tffs -n macwlan -i $(find_mtd_part "tffs (1)")) ;; avm,fritz300e) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 782e003911..428b502d81 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -10,7 +10,8 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in avm,fritz1750e|\ - avm,fritz4020) + avm,fritz4020|\ + avm,fritz450e) caldata_extract_reverse "urlader" 0x1541 0x440 ;; dlink,dir-505|\ diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh index 371efd6a83..b3c3de298e 100644 --- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh +++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh @@ -4,7 +4,8 @@ preinit_set_mac_address() { case $(board_name) in - avm,fritz1750e) + avm,fritz1750e|\ + avm,fritz450e) ip link set dev eth0 address $(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) ;; siemens,ws-ap3610) |