diff options
| author | Sebastian Schaper <openwrt@sebastianschaper.net> | 2020-05-13 17:37:31 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-07-08 22:54:34 +0200 |
| commit | 14599c59457f04b425603a08dde6aefbc515ff3b (patch) | |
| tree | a6b0aa29e9846da69dc82203a068fc62d1282f87 /target/linux/ath79/generic/base-files | |
| parent | 691bf54369fbccf9c27a14231a14dcdf07acaf36 (diff) | |
| download | upstream-14599c59457f04b425603a08dde6aefbc515ff3b.tar.gz upstream-14599c59457f04b425603a08dde6aefbc515ff3b.tar.bz2 upstream-14599c59457f04b425603a08dde6aefbc515ff3b.zip | |
ath79: add support for D-Link DCH-G020 Rev. A1
The DCH-G020 is a Smart Home Gateway for Z-Wave devices.
Specifications:
* QCA9531, 16 MiB Flash, 64 MiB RAM
* On-Board USB SD3503A Z-Wave dongle
* GL850 USB 2.0 Hub (one rear port, internal Z-Wave)
* Two Ethernet Ports (10/100)
Installation:
* Web UI: http://192.168.0.60 (or different address obtained via DHCP)
Login with 'admin' and the 6-digit PIN Code from the bottom label
* Recovery Web UI: Keep reset button pressed during power-on
until LED starts flashing red, upgrade via http://192.168.0.60
* Some modern browsers may have problems flashing via the Web UI,
if this occurs consider booting to recovery mode and flashing via:
curl -F \
files=@openwrt-ath79-generic-dlink_dch-g020-a1-squashfs-factory.bin \
http://192.168.0.60/cgi/index
Known issues:
* Real-Time-Clock is not working as there is currently no matching driver
It is still included in the dts as compatible = "pericom,pt7c43390";
* openzwave was tested on v19.07 (running MinOZW as a proof-of-concept),
but the package grew too big as lots of device pictures were included,
thus any use of Z-Wave is up to the user (e.g. extroot and domoticz)
The device will use the same MAC address for both wired and wireless
interfaces, however it is stored at two different locations in the flash.
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/02_network | 8 | ||||
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 3 |
2 files changed, 11 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f2b6ef0aed..4580f3ab4e 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -147,6 +147,10 @@ ath79_setup_interfaces() dlink,dap-2695-a1) ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1" ;; + dlink,dch-g020-a1) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:2" "2:lan:1" + ;; dlink,dir-825-b1) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ @@ -379,6 +383,10 @@ ath79_setup_macs() dlink,dap-2695-a1) label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac") ;; + dlink,dch-g020-a1) + lan_mac=$(mtd_get_mac_text "mp" 0x1) + label_mac=$lan_mac + ;; dlink,dir-825-b1) lan_mac=$(mtd_get_mac_text "caldata" 0xffa0) wan_mac=$(mtd_get_mac_text "caldata" 0xffb4) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index f814bd46ad..cf582b8465 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -17,6 +17,9 @@ case "$board" in adtran,bsap1840) macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress ;; + dlink,dch-g020-a1) + mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress + ;; iodata,wn-ac1600dgr) # There is no eeprom data for 5 GHz wlan in "art" partition # which would allow to patch the macaddress |