diff options
author | Sven Eckelmann <sven@narfation.org> | 2020-11-23 13:41:34 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-01-16 20:51:14 +0100 |
commit | 1699c1dc7f26b332f868d338457abfbe716d6ba0 (patch) | |
tree | c8524b6a9bb6d34fe0dc9b8ea5b9f763b844ca17 /target/linux/ath79/generic/base-files/lib/upgrade/platform.sh | |
parent | 7e484b902d269d8fd22afeccb765ccc2cd8efa19 (diff) | |
download | upstream-1699c1dc7f26b332f868d338457abfbe716d6ba0.tar.gz upstream-1699c1dc7f26b332f868d338457abfbe716d6ba0.tar.bz2 upstream-1699c1dc7f26b332f868d338457abfbe716d6ba0.zip |
ath79: Add support for OpenMesh OM5P-AC v2
Device specifications:
======================
* Qualcomm/Atheros QCA9558 ver 1 rev 0
* 720/600/200 MHz (CPU/DDR/AHB)
* 128 MB of RAM
* 16 MB of SPI NOR flash
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2T2R 2.4 GHz Wi-Fi (11n)
* 2T2R 5 GHz Wi-Fi (11ac)
* 4x GPIO-LEDs (3x wifi, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring
* 2x ethernet
- eth0
+ AR8035 ethernet PHY (RGMII)
+ 10/100/1000 Mbps Ethernet
+ 802.3af POE
+ used as LAN interface
- eth1
+ AR8031 ethernet PHY (RGMII)
+ 10/100/1000 Mbps Ethernet
+ 18-24V passive POE (mode B)
+ used as WAN interface
* 12-24V 1A DC
* internal antennas
This device support is based on the partially working stub from commit
53c474abbdfe ("ath79: add new OF only target for QCA MIPS silicon").
Flashing instructions:
======================
Various methods can be used to install the actual image on the flash.
Two easy ones are:
ap51-flash
----------
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.
initramfs from TFTP
-------------------
The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):
setenv serverip 192.168.1.21
setenv ipaddr 192.168.1.1
tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr
The actual sysupgrade image can then be transferred (on the LAN port) to the
device via
scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/
On the device, the sysupgrade must then be started using
sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'target/linux/ath79/generic/base-files/lib/upgrade/platform.sh')
-rw-r--r-- | target/linux/ath79/generic/base-files/lib/upgrade/platform.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 3d953d7982..13b6ec9d99 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -82,6 +82,7 @@ platform_do_upgrade() { openmesh,om2p-lc|\ openmesh,om5p|\ openmesh,om5p-ac-v1|\ + openmesh,om5p-ac-v2|\ openmesh,om5p-an) PART_NAME="inactive" platform_do_upgrade_openmesh "$1" |