aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic/base-files/etc
diff options
context:
space:
mode:
authorRoberto Valentini <valantin89@gmail.com>2021-07-01 11:56:30 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-07-11 16:58:12 +0200
commitaf56075a8ff760832df27546325428f2497a0121 (patch)
tree10adbb81fee0b99358d8439a2141253eae8b259c /target/linux/ath79/generic/base-files/etc
parent0c721434ea56044cdc1c13554c970b82471bc43e (diff)
downloadupstream-af56075a8ff760832df27546325428f2497a0121.tar.gz
upstream-af56075a8ff760832df27546325428f2497a0121.tar.bz2
upstream-af56075a8ff760832df27546325428f2497a0121.zip
ath79: add support for TP-Link RE455 v1
TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini <valantin89@gmail.com>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc')
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 890b38e58a..5e5ccca32f 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -352,7 +352,8 @@ tplink,tl-wr902ac-v1)
tplink,re355-v1|\
tplink,re450-v1|\
tplink,re450-v2|\
-tplink,re450-v3)
+tplink,re450-v3|\
+tplink,re455-v1)
ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "green:lan_link" "eth0" "link"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 025d55fec0..1731f141af 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -70,6 +70,7 @@ ath79_setup_interfaces()
tplink,re450-v1|\
tplink,re450-v2|\
tplink,re450-v3|\
+ tplink,re455-v1|\
tplink,tl-wr902ac-v1|\
ubnt,bullet-ac|\
ubnt,bullet-m-ar7240|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8d7407450d..59d692c3d0 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -141,7 +141,8 @@ case "$FIRMWARE" in
;;
tplink,eap245-v1|\
tplink,re450-v2|\
- tplink,re450-v3)
+ tplink,re450-v3|\
+ tplink,re455-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
;;