diff options
| author | Thibaut VARÈNE <hacks@slashdirt.org> | 2022-04-15 13:17:49 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2022-04-16 14:48:29 +0200 |
| commit | 06874171d125f0a69d6fb8cfd12213b7913d317e (patch) | |
| tree | 3d1082fb04eb2ec83c2f8a32a6b8483a92347306 /target/linux/ath79/generic/base-files/etc | |
| parent | c5ef62a218455f5d60b8f76307784a90a77dda43 (diff) | |
| download | upstream-06874171d125f0a69d6fb8cfd12213b7913d317e.tar.gz upstream-06874171d125f0a69d6fb8cfd12213b7913d317e.tar.bz2 upstream-06874171d125f0a69d6fb8cfd12213b7913d317e.zip | |
ath79: add support for Yuncore XD3200
Specification:
- QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR
- 2T2R 802.11b/g/n 2.4GHz
- 2T2R 802.11n/ac 5GHz
- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
LED for 5 GHz WLAN is currently not supported as it is connected directly
to the QCA9882 radio chip.
Flash instructions:
If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):
fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin
In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:
1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
seconds, recovery mode should start downloading image from server
(unfortunately, there is no visible indication that recovery got
enabled - in case of problems check TFTP server logs)
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry-picked from commit c91df224f54fdd44c9c0487a8c91876f5d273164)
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc')
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 3031b4703b..b6c68db813 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -220,7 +220,8 @@ glinet,gl-x750) hak5,lan-turtle) ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1" ;; -joyit,jt-or750i) +joyit,jt-or750i|\ +yuncore,xd3200) ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0" ;; meraki,mr12|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index d4f53e7dae..5bf78117e1 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -306,6 +306,7 @@ ath79_setup_interfaces() ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac|\ yuncore,a782|\ + yuncore,xd3200|\ yuncore,xd4200) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:wan" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 69735f3360..c562fa7c74 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -44,7 +44,8 @@ case "$FIRMWARE" in ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2|\ ubnt,unifiac-pro|\ - yuncore,a770) + yuncore,a770|\ + yuncore,xd3200) caldata_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ |