diff options
author | David Bauer <mail@david-bauer.net> | 2020-01-12 20:20:43 +0100 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2020-01-15 20:38:46 +0100 |
commit | c9ac7b17296ff29d9df39db8a68c449ef1514bbd (patch) | |
tree | 7c5262a7f05c0ee5990010dc2ef1fb7e110de782 /target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | |
parent | 475a504dbc05e7a7e7d38db426c657b8c0c834fd (diff) | |
download | upstream-c9ac7b17296ff29d9df39db8a68c449ef1514bbd.tar.gz upstream-c9ac7b17296ff29d9df39db8a68c449ef1514bbd.tar.bz2 upstream-c9ac7b17296ff29d9df39db8a68c449ef1514bbd.zip |
ath79: add support for D-Link DIR-505
This commit adds support for the D-Link DIR-505, previously supported in
ar71xx.
Hardware
--------
SoC: Atheros AR9330
FLASH: 8M SPI-NOR
RAM: 64M
WIFI: 1T1R 1SS Atheros AR9330
LED: Power green, Status red
BTN: WPS, Reset
Installation
------------
Currently, installation is only possible by sysupgrading from an earlier
OpenWrt version, U-Boot TFTP or a modded U-Boot. I do not have the
original bootloader from D-Link on my device anymore, so i cannot test
the factory image.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom')
-rw-r--r-- | target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 84d840569b..4158116256 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,6 +12,7 @@ case "$FIRMWARE" in avm,fritz4020) caldata_extract_reverse "urlader" 0x1541 0x440 ;; + dlink,dir-505|\ dlink,dir-825-c1|\ dlink,dir-835-a1) caldata_extract "art" 0x1000 0x440 |