diff options
| author | Catrinel Catrinescu <cc@80211.de> | 2021-12-02 10:07:54 +0000 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2021-12-03 12:30:08 +0100 |
| commit | 24d455d1d0adf64de844b25800c23992aa3eeda5 (patch) | |
| tree | fa9cbc391a9202a01f58569b837dc874304e5dc0 /target/linux/ath79/generic/base-files/etc/board.d/02_network | |
| parent | 8ac8c09f5ebbb6ae5e73b8a8ff4b095c1154f707 (diff) | |
| download | upstream-24d455d1d0adf64de844b25800c23992aa3eeda5.tar.gz upstream-24d455d1d0adf64de844b25800c23992aa3eeda5.tar.bz2 upstream-24d455d1d0adf64de844b25800c23992aa3eeda5.zip | |
ath79: add Embedded Wireless Balin Platform
Add the Embedded Wireless "Balin" platform, it is in ar71xx too
SoC: QCA AR9344 or AR9350
RAM: DDR2-RAM 64MBytes
Flash: SPI-NOR 16MBytes
WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n
Ethernet: 3 x 10/100 Mb/s
USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up
PCIe: MiniPCIe - 1 x lane PCIe 1.2
Button: 1 x Reset-Button
UART: 1 x Normal, 1 x High-Speed
JTAG: 1 x EJTAG
LED: 1 x Green Power/Status LED
GPIO: 10 x Input/Output multiplexed
The module comes already with the current vanilla OpenWrt firmware.
To update, use "sysupgrade -n --force <image>" image directly in
vendor firmware. This resets the existing configurations back to
default!
Signed-off-by: Catrinel Catrinescu <cc@80211.de>
[indent, led function+color properties, fix partition unit-address,
re-enable pcie port, mention button+led in commit message]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/board.d/02_network')
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/board.d/02_network | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 01e364a8fe..8c09932bd7 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -265,6 +265,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan" ;; + embeddedwireless,balin) + ucidef_add_switch "switch0" \ + "0@eth0" "5:lan:1" "4:lan:2" "3:wan" + ;; embeddedwireless,dorin) ucidef_add_switch "switch0" \ "0@eth0" "1:wan" "2:lan:3" "3:lan:2" |