diff options
| author | August Huber <auh@google.com> | 2020-01-26 11:55:11 -0500 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-02-03 16:18:08 +0100 |
| commit | ae61d21ca30f3af2732f73f82a01bba7e4341459 (patch) | |
| tree | aaecd35e672ede2a75d9c3e1be11aabf883d729d /target/linux/ath79/generic/base-files/etc/board.d/02_network | |
| parent | 3b99d6763996d4cf8d59361f25046cc8086da332 (diff) | |
| download | upstream-ae61d21ca30f3af2732f73f82a01bba7e4341459.tar.gz upstream-ae61d21ca30f3af2732f73f82a01bba7e4341459.tar.bz2 upstream-ae61d21ca30f3af2732f73f82a01bba7e4341459.zip | |
ath79: add support for COMFAST CF-E560AC
This commit adds support for the COMFAST CF-E560AC, an ap143 based
in-wall access point.
Specifications:
- SoC: Qualcomm Atheros QCA9531
- RAM: 128 MB DDR2 (Winbond W971GG6SB-25)
- Storage: 16 MB NOR (Winbond 25Q128JVSO)
- WAN: 1x 10/100 PoE ethernet (48v)
- LAN: 4x 10/100 ethernet
- WLAN1: QCA9531 - 802.11b/g/n - 2x SKY85303-21 FEM
- WLAN2: QCA9886 - 802.11ac/n/a - 2x SKY85735-11 FEM
- USB: one external USB2.0 port
- UART: 3.3v, 2.54mm headers already populated on board
- LED: 7x external
- Button: 1x external
- Boot: U-Boot 1.1.4 (pepe2k/u-boot_mod)
MAC addressing:
- stock
LAN *:40 (label)
WAN *:41
5G *:42
2.4G *:4a
- flash (art partition)
0x0 *:40 (label)
0x6 *:42
0x1002 *:41
0x5006 *:43
This device contains valid MAC addresses in art 0x0, 0x6, 0x1002 and
0x5006, however the vendor firmware only reads from art:0x0 for the LAN
interface and then increments in 02_network. They also jump 8 addresses
for the second wifi interface (2.4 GHz). This behavior has been duplicated
in the DTS and ath10k hotplug to align addresses with the vendor firmware
v2.6.0.
Recovery instructions:
This device contains built-in u-boot tftp recovery.
1. Configure PC with static IP 192.168.1.10/24 and tftp server.
2. Place desired image at /firmware_auto.bin at tftp root.
3. Connect device to PC, and power on.
4. Device will fetch flash from tftp, flash and reboot into new image.
Signed-off-by: August Huber <auh@google.com>
[move jtag_disable_pins, remove unnecessary statuses in DTS, remove
duplicate entry in 11-ath10k-caldata, remove hub_port0 label in DTS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/02_network | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f5196be77f..a3fcf35715 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -103,6 +103,13 @@ ath79_setup_interfaces() ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + comfast,cf-e560ac|\ + tplink,archer-c60-v1|\ + tplink,archer-c60-v2) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" + ;; comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2) ucidef_add_switch "switch0" \ @@ -228,12 +235,6 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" ;; - tplink,archer-c60-v1|\ - tplink,archer-c60-v2) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" - ;; tplink,archer-d50-v1) ucidef_add_switch "switch0" \ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan" |