diff options
| author | Michael Pratt <mcpratt@pm.me> | 2021-01-01 16:48:52 -0500 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-01-07 19:51:50 +0100 |
| commit | 0070650df45da29a55a89922544dba6859c18f2b (patch) | |
| tree | 8d39fecdb7add794f134e586b85427a059f3265f /target/linux/ath79/generic/base-files/etc/board.d/01_leds | |
| parent | ecded5bf0908953c47933967c0046cceb3ce0ec1 (diff) | |
| download | upstream-0070650df45da29a55a89922544dba6859c18f2b.tar.gz upstream-0070650df45da29a55a89922544dba6859c18f2b.tar.bz2 upstream-0070650df45da29a55a89922544dba6859c18f2b.zip | |
ath79: move small-flash Engenius boards to tiny
This moves some of the Engenius boards from generic to tiny:
- EAP350 v1
- ECB350 v1
- ENH202 v1
For these, factory.bin builds are already failing on master
branch because of the unique situation for these boards:
- 8 MB flash
- an extra "failsafe" image for recovery
- TFTP does not work (barely possible with 600 MTU)
- bootloader loads image from a longer flash offset
- 1 eraseblock each needed for OKLI kernel loader and fake rootfs
- using mtd-concat to make use of remaining space...
The manual alternative would be removing the failsafe partition.
However this comes with the risk of extremely difficult recovery
if a flash ever fails because TFTP on the bootloader is bugged.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[improve commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 8 |
1 files changed, 0 insertions, 8 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index b961e7d3e8..079c8d4e47 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -182,14 +182,6 @@ dlink,dap-1365-a1) dlink,dir-859-a1) ucidef_set_led_switch "internet" "WAN" "green:internet" "switch0" "0x20" ;; -engenius,enh202-v1) - ucidef_set_led_switch "lan" "LAN" "amber:lan" "switch0" "0x10" - ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100" - ;; engenius,ens202ext-v1|\ engenius,enstationac-v1) ucidef_set_rssimon "wlan0" "200000" "1" |