diff options
author | David Bauer <mail@david-bauer.net> | 2021-04-01 01:20:45 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2021-05-03 01:39:10 +0200 |
commit | d7fd690b8c3a08bbd267b551873f64e8f58fb25b (patch) | |
tree | 3b047dc9864cbd95e8143b2c9905083b772ddb57 /target/linux/ath79/files/drivers/net/ethernet | |
parent | 62099d98e4746d8a4e9ee79360314c1900c8974e (diff) | |
download | upstream-d7fd690b8c3a08bbd267b551873f64e8f58fb25b.tar.gz upstream-d7fd690b8c3a08bbd267b551873f64e8f58fb25b.tar.bz2 upstream-d7fd690b8c3a08bbd267b551873f64e8f58fb25b.zip |
ath79: force SGMII SerDes mode to MAC operation
The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default.
This only allows for 1000 Mbit/s links, however when used with an SGMII
PHY in 100 Mbit/s link mode, the link remains dead.
This strictly has nothing to do with the SerDes calibration, however it
is done at the same point in the QCA reference U-Boot which is the
blueprint for everything happening here. As the current state is more or
less a hack, this should be fine.
This fixes the issues outlined above on a TP-Link EAP-225 Outdoor.
Reported-by: Tom Herbers <freifunk@tomherbers.de>
Tested-by: Tom Herbers <freifunk@tomherbers.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit fbbad9a9a629b388626b477e6cd692c160f63fb3)
Diffstat (limited to 'target/linux/ath79/files/drivers/net/ethernet')
-rw-r--r-- | target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index 07d9992ca7..84b0f9e4ac 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -602,6 +602,11 @@ static void ag71xx_sgmii_serdes_init_qca956x(struct device_node *np) goto err_iomap; } + t = __raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_CONFIG); + t &= ~(QCA956X_SGMII_CONFIG_MODE_CTRL_MASK << QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT); + t |= QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC; + __raw_writel(t, gmac_base + QCA956X_GMAC_REG_SGMII_CONFIG); + pr_debug("%pOF: fixup SERDES calibration to value %i\n", np_dev, serdes_cal); t = __raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_SERDES); |