ath79: add support for TP-Link TL-WR941ND v5

Specifications:
- SoC: ar9341
- RAM: 32M
- Flash: 4M
- Ethernet: 5x FE ports
- WiFi: ar9341-wmac

Flash instruction:
Upload generated factory firmware on vendor's web interface.

This device is very similar to the TL-WR841N v8, only two LED GPIOs are
different.
Buttons configuration is similar to TL-WR842ND v2 but both buttons are
active low.

Signed-off-by: Will Moss <willormos@gmail.com>

1 files changed, 103 insertions, 0 deletions

diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wr941nd-v5.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wr941nd-v5.dts
new file mode 100644
index 0000000000..a61f4a381e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wr941nd-v5.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341_tplink.dtsi"
+
+/ {
+	model = "TP-Link TL-WR941ND v5";
+	compatible = "tplink,tl-wr941nd-v5", "qca,ar9341";
+
+	aliases {
+		label-mac-device = &wmac;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "Reset/WPS";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&leds {
+
+	lan3 {
+		gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+	};
+
+	lan4 {
+		gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x020000 0x3d0000>;
+			};
+
+			art: partition@3f0000 {
+				label = "art";
+				reg = <0x3f0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {		// WAN port, initialized last as eth1
+	nvmem-cells = <&macaddr_uboot_1fc00>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&eth1 {		// LAN ports, initialized first as eth0
+	nvmem-cells = <&macaddr_uboot_1fc00>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	mtd-cal-data = <&art 0x1000>;
+
+	nvmem-cells = <&macaddr_uboot_1fc00>;
+	nvmem-cell-names = "mac-address";
+};
+
+&uboot {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_uboot_1fc00: macaddr@1fc00 {
+		reg = <0x1fc00 0x6>;
+	};
+};