diff options
| author | Shiji Yang <yangshiji66@qq.com> | 2023-05-05 01:50:36 +0000 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2023-05-24 19:25:56 +0100 |
| commit | 635d5488c91bbf4facf238c6e4baece6f131cbff (patch) | |
| tree | 18dca004366840b5f97aeb956da46608d1d53610 /target/linux/ath79/dts | |
| parent | f0b2fdb82ed606fd872b2b15214768a3995b51d5 (diff) | |
| download | upstream-635d5488c91bbf4facf238c6e4baece6f131cbff.tar.gz upstream-635d5488c91bbf4facf238c6e4baece6f131cbff.tar.bz2 upstream-635d5488c91bbf4facf238c6e4baece6f131cbff.zip | |
ath79: add support for D-Link DIR-859 A3
Specifications:
SOC: QCA9563 775 MHz + QCA9880
Switch: QCA8337N-AL3C
RAM: Winbond W9751G6KB-25 64 MiB
Flash: Winbond W25Q128FVSG 16 MiB
WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3
LAN: LAN ports *4
WAN: WAN port *1
Buttons: reset *1 + wps *1
LEDs: ethernet *5, power, wlan, wps
MAC Address:
use address source1 source2
label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr
lan 40:9b:xx:xx:xx:3c devdata@0x3f $label
wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3
wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label
wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2
Install via Web UI:
Apply factory image in the stock firmware's Web UI.
Install via Emergency Room Mode:
DIR-859 A1 will enter recovery mode when the system fails to boot
or press reset button for about 10 seconds.
First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1.
Then we can open http://192.168.0.1 in the web browser to upload
OpenWrt factory image or stock firmware. Some modern browsers may
need to turn on compatibility mode.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit 0ffbef9317a1dc049ad259c1ec1530355efc0552)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/ath79/dts')
| -rw-r--r-- | target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts | 64 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi | 4 |
2 files changed, 66 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts new file mode 100644 index 0000000000..164e0802f9 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_dlink_dir-8x9-a1.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + compatible = "dlink,dir-859-a3", "qca,qca9563"; + model = "D-Link DIR-859 A3"; + + aliases { + label-mac-device = &wmac; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wlan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wps { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WPS; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ath10k { + nvmem-cells = <&calibration_ath10k>, <&macaddr_bdcfg_ethaddr 2>; + nvmem-cell-names = "calibration", "mac-address"; +}; + +&bdcfg { + macaddr_bdcfg_ethaddr: ethaddr { + #nvmem-cell-cells = <1>; + }; +}; + +&wmac { + nvmem-cells = <&calibration_ath9k>, <&macaddr_bdcfg_ethaddr 0>; + nvmem-cell-names = "calibration", "mac-address"; +}; diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi index 754fcd415d..3fd9790c4a 100644 --- a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi +++ b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi @@ -28,7 +28,7 @@ &pcie { status = "okay"; - wifi@0,0 { + ath10k: wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; @@ -56,7 +56,7 @@ read-only; }; - partition@40000 { + bdcfg: partition@40000 { compatible = "u-boot,env"; label = "bdcfg"; reg = <0x040000 0x010000>; |