aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2019-02-05 17:23:58 +0900
committerChristian Lamparter <chunkeey@gmail.com>2019-02-14 16:56:15 +0100
commit93d4439454247fb3f7cc88d8ad9a7e80bb440145 (patch)
tree53ab0ce7babe1c478e8285bef69a5b4ab926ccac /target/linux/ath79/dts
parentcc8bd777723f32eca3d8643270dfc765cc772d1c (diff)
downloadupstream-93d4439454247fb3f7cc88d8ad9a7e80bb440145.tar.gz
upstream-93d4439454247fb3f7cc88d8ad9a7e80bb440145.tar.bz2
upstream-93d4439454247fb3f7cc88d8ad9a7e80bb440145.zip
ath79: add support for I-O DATA WN-AC1600DGR
I-O DATA WN-AC1600DGR is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9557. Specification: - SoC: Qualcomm Atheros QCA9557 - RAM: 128 MB - Flash: 16 MB - WLAN: 2.4/5 GHz - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 3T3R (QCA9880) - Ethernet: 5x 10/100/1000 Mbps - Switch: QCA8337N - LED/key: 6x/6x(4x buttons, 1x slide switch) - UART: through-hole on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WN-AC1600DGR 2. Connect power cable to WN-AC1600DGR and turn on it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Alternative flash instruction using initramfs image: 1. Prepare a computer and TFTP server software with the IP address "192.168.99.8" and renamed OpenWrt initramfs image "uImageWN-AC1600DGR" 2. Connect between WN-AC1600DGR and the computer with UART 3. Connect power cable to WN-AC1600DGR, press "4" on the serial console and enter the U-Boot console 4. execute "tftpboot" command on the console and download initramfs image from the TFTP server 5. execute "bootm" command and boot OpenWrt 6. On initramfs image, download the sysupgrade image to the device and perform sysupgrade with it 7. Wait ~150 seconds to complete flashing This commit also removes unnecessary "qca,no-eeprom" property from the ath10k wifi node. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi19
-rw-r--r--target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts16
-rw-r--r--target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts28
-rw-r--r--target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts16
4 files changed, 63 insertions, 16 deletions
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi
index 22a23f97ae..86b97437ea 100644
--- a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi
@@ -18,7 +18,7 @@
bootargs = "console=ttyS0,115200n8";
};
- leds {
+ leds: leds {
compatible = "gpio-leds";
power: power {
@@ -27,11 +27,6 @@
default-state = "on";
};
- copy {
- label = "iodata:green:copy";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
-
eco {
label = "iodata:green:eco";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
@@ -55,11 +50,11 @@
};
};
- keys {
+ keys: keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
- button_eco {
+ eco {
label = "eco";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@@ -74,13 +69,6 @@
debounce-interval = <60>;
};
- button_copy {
- label = "copy";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- debounce-interval = <60>;
- };
-
wps {
label = "wps";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
@@ -190,7 +178,6 @@
wifi@0,0 {
compatible = "pci168c,003c";
reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
};
};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts
index 7990d9cd57..c2fc7abcb3 100644
--- a/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts
@@ -10,3 +10,19 @@
compatible = "iodata,wn-ac1167dgr", "qca,qca9557";
model = "I-O DATA WN-AC1167DGR";
};
+
+&leds {
+ copy {
+ label = "iodata:green:copy";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keys {
+ copy {
+ label = "copy";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts
new file mode 100644
index 0000000000..ef47e1e41f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557_iodata_wn-ac-dgr.dtsi"
+
+/ {
+ compatible = "iodata,wn-ac1600dgr", "qca,qca9557";
+ model = "I-O DATA WN-AC1600DGR";
+};
+
+&leds {
+ function {
+ label = "iodata:green:function";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keys {
+ function {
+ label = "function";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
index 3eedec72e7..37ae8fe01f 100644
--- a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
@@ -10,3 +10,19 @@
compatible = "iodata,wn-ac1600dgr2", "qca,qca9557";
model = "I-O DATA WN-AC1600DGR2";
};
+
+&leds {
+ copy {
+ label = "iodata:green:copy";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keys {
+ copy {
+ label = "copy";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+};