ath79: Add support for TP-Link TL-WR1043N v5

Specifications:

 - QCA9563 at 775 MHz
 - 64 MB RAM Zentel A3R12E40CBF-8E
 - 16 MB flash Winbond W25Q128FVSG
 - 3 (non-detachable) Antennas / 450 Mbit
 - 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
 - reset and Wi-Fi buttons

TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option. It also has different partitioning scheme.

The software is more in line with the Archer series in that it uses a
nested bootloader scheme.

(This has been adapted from the OpenWrt Wiki page)
<https://openwrt.org/toh/tp-link/tl-wr1043nd>

Installation on HW rev.5:

Factory firmware can be installed via the WEB interface.

Alternatively, it is also possible to use a TFTP server
for recovery purposes:
 - Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin
 - Set static IP of your PC to *192.168.0.66*
 - Router will obtain IP 192.168.0.86 for a few seconds while
   loading, when reset button pressed at power On.

And finally, there's always u-boot access through the UART.
For information visit the wiki.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[reworked commit message]

1 files changed, 74 insertions, 0 deletions

diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts
new file mode 100644
index 0000000000..d983498b6a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_tplink_tl-wr1043n.dtsi"
+
+/ {
+	compatible = "tplink,tl-wr1043n-v5", "qca,qca9563";
+	model = "TP-Link TL-WR1043N v5";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "factory-uboot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "u-boot";
+				reg = <0x020000 0x020000>;
+				read-only;
+			};
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x040000 0xec0000>;
+			};
+
+			info: partition@f00000 {
+				label = "product-info";
+				reg = <0xf00000 0x020000>;
+				read-only;
+			};
+
+			partition@f20000 {
+				label = "config";
+				reg = <0xf20000 0x0a0000>;
+				read-only;
+			};
+
+			partition@fc0000 {
+				label = "partition-table";
+				reg = <0xfc0000 0x010000>;
+				read-only;
+			};
+
+			partition@fd0000 {
+				label = "logs";
+				reg = <0xfd0000 0x020000>;
+				read-only;
+			};
+
+			art: partition@ff0000 {
+				label = "ART";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};