aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2020-08-19 16:01:25 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2020-09-28 01:28:37 +0200
commite9263123f9f65814b8858efb5b79d58fe05ca732 (patch)
tree7d4cb83709b37e907240c700a520a73a7b4b27d0 /target/linux/ath79/dts
parentb33ce8c5355eec61663ce0ac789118f82041045f (diff)
downloadupstream-e9263123f9f65814b8858efb5b79d58fe05ca732.tar.gz
upstream-e9263123f9f65814b8858efb5b79d58fe05ca732.tar.bz2
upstream-e9263123f9f65814b8858efb5b79d58fe05ca732.zip
ath79: add support for Hak5 WiFi Pineapple NANO
Hak5 WiFi Pineapple NANO is an "USB dongle" device dedicated for Wi-Fi pentesters. This device is based on Atheros AR9331 and AR9271. Support for it was first introduced in 950b278c81 (ar71xx). FCC ID: 2AB87-NANO. Specifications: - Atheros AR9331 - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of flash (SPI NOR) - 1T1R 2.4 GHz Wi-Fi (AR9331) - 1T1R 2.4 GHz Wi-Fi (AR9271L), with ext. PA and LNA (Qorvo RFFM4203) - 2x RP-SMA antenna connectors - 1x USB 2.0 to 10/100 Ethernet bridge (ASIX AX88772A) - integrated 4-port USB 2.0 HUB: Alcor Micro AU6259: - 1x USB 2.0 - 1x microSD card reader (Genesys Logic GL834L) - Atheros AR9271L - 1x LED, 1x button - UART (4-pin, 2 mm pitch) header on PCB - USB 2.0 Type-A plug for power and AX88772A Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts128
1 files changed, 128 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts b/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts
new file mode 100644
index 0000000000..0a9cf9566f
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Hak5 WiFi Pineapple NANO";
+ compatible = "hak5,wifi-pineapple-nano", "qca,ar9331";
+
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-upgrade = &led_system;
+ serial0 = &uart;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ microsd-detect {
+ gpio-export,name = "microsd-detect";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ usb-alarm {
+ gpio-export,name = "usb-alarm";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ usb-power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "wifi-pineapple-nano:blue:system";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+};
+
+&eth1 {
+ status = "okay";
+
+ compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ compatible = "tplink,firmware";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};