ath79: add support for TP-Link CPE610 v2

TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 1x 10/100 Mbps Ethernet
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 23dBi high-gain directional 2×2 MIMO antenna and a
   dedicated metal reflector
 - Power, LAN, WLAN5G green LEDs
 - 3x green RSSI LEDs

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>

1 files changed, 34 insertions, 0 deletions

diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts
new file mode 100644
index 0000000000..c00f21a51e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+	model = "TP-Link CPE610 v2";
+	compatible = "tplink,cpe610-v2", "qca,ar9344";
+
+	aliases {
+		led-boot = &led_lan;
+		led-failsafe = &led_lan;
+		led-upgrade = &led_lan;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_lan: lan {
+			label = "tp-link:green:lan";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "tp-link:green:wlan5g";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+};
+
+&eth1 {
+	compatible = "syscon", "simple-mfd";
+};