ath79: add support for Ubiquiti UniFi AC-Pro

rework the dts to a common unifi-ac dtsi
pro network is connected via phy0 and has usb ports
lite network is connected via phy4 without usb ports

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

3 files changed, 161 insertions, 118 deletions

diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts
index ff24338ca0..6b872561ed 100644
--- a/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts
@@ -1,122 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_ubnt_unifiac.dtsi"
 
 / {
 	compatible = "ubnt,unifiac-lite", "qca,qca9563";
 	model = "Ubiquiti UniFi-AC-LITE/MESH/LR";
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wifi_ac {
-			label = "ubnt:white:dome";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wifi_n {
-			label = "ubnt:blue:dome";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "phy1tpt";
-		};
-
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "Reset button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&spi {
-	status = "okay";
-	num-cs = <1>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x060000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "u-boot-env";
-				reg = <0x060000 0x010000>;
-				read-only;
-			};
-
-			partition@70000 {
-				label = "firmware";
-				reg = <0x070000 0x790000>;
-			};
-
-			partition@800000 {
-				label = "ubnt-airos";
-				reg = <0x800000 0x790000>;
-				read-only;
-			};
-
-			partition@f90000 {
-				label = "bs";
-				reg = <0xf90000 0x020000>;
-				read-only;
-			};
-
-			partition@fb0000 {
-				label = "cfg";
-				reg = <0xfb0000 0x040000>;
-				read-only;
-			};
-
-			eeprom: partition@ff0000 {
-				label = "EEPROM";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
-	};
 };
 
 &mdio0 {
@@ -135,9 +24,3 @@
 	mtd-mac-address = <&eeprom 0x0>;
 	phy-handle = <&phy4>;
 };
-
-&wmac {
-	status = "okay";
-	mtd-cal-data = <&eeprom 0x1000>;
-	mtd-mac-address = <&eeprom 0x0>;
-};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dts
new file mode 100644
index 0000000000..31ca0ab965
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_ubnt_unifiac.dtsi"
+
+/ {
+	compatible = "ubnt,unifiac-pro", "qca,qca9563";
+	model = "Ubiquiti UniFi-AC-PRO/MESH PRO";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	phy-mask = <0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "sgmii";
+		qca,ar8327-initvals = <
+			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+			0x7c 0x0000007e /* PORT0_STATUS */
+		>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	mtd-mac-address = <&eeprom 0x0>;
+	phy-handle = <&phy0>;
+};
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
new file mode 100644
index 0000000000..941a5180df
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wifi_ac {
+			label = "ubnt:white:dome";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wifi_n {
+			label = "ubnt:blue:dome";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy1tpt";
+		};
+
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x060000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "u-boot-env";
+				reg = <0x060000 0x010000>;
+				read-only;
+			};
+
+			partition@70000 {
+				label = "firmware";
+				reg = <0x070000 0x790000>;
+			};
+
+			partition@800000 {
+				label = "ubnt-airos";
+				reg = <0x800000 0x790000>;
+				read-only;
+			};
+
+			partition@f90000 {
+				label = "bs";
+				reg = <0xf90000 0x020000>;
+				read-only;
+			};
+
+			partition@fb0000 {
+				label = "cfg";
+				reg = <0xfb0000 0x040000>;
+				read-only;
+			};
+
+			eeprom: partition@ff0000 {
+				label = "EEPROM";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&eeprom 0x1000>;
+	mtd-mac-address = <&eeprom 0x0>;
+};