aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-06-11 17:27:51 +0200
committerDavid Bauer <mail@david-bauer.net>2019-07-21 13:09:45 +0200
commit5cd9b50d69cb42d55b9cc466b749b41d1da465de (patch)
treee6be050a234abb4b68213b4a91852f69bb0ddf0e /target/linux/ath79/dts
parent76a4c93f9dcafc0efd6f825fbd40eb4a2e53d456 (diff)
downloadupstream-5cd9b50d69cb42d55b9cc466b749b41d1da465de.tar.gz
upstream-5cd9b50d69cb42d55b9cc466b749b41d1da465de.tar.bz2
upstream-5cd9b50d69cb42d55b9cc466b749b41d1da465de.zip
ath79: add support for devolo WiFi pro 1750x
Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 3T3R WiFi5: QCA9880 3T3R BTN: 1x Reset LED: 1x LED Power (non-controllable) 1x LED Status (internal) 1x LED LAN (controlled by PHY) 1x LED WLAN BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to external-LED header. Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit cb3cd526948af3f69da1af18e035177a0a8f58e3)
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts53
1 files changed, 53 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts
new file mode 100644
index 0000000000..d0d678d0bf
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1750x.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1750x", "qca,qca9558";
+ model = "devolo WiFi pro 1750x";
+
+ aliases {
+ led-boot = &status_red;
+ led-failsafe = &status_red;
+ led-running = &status_red;
+ led-upgrade = &status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_red: status_red {
+ /* This LED is not visible on the external casing. */
+ label = "dvl1750x:red:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "dvl1750x:green:wlan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&eth0 {
+ pll-data = <0xbe000000 0x80000101 0x80001313>;
+ phy-mode = "rgmii-id";
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <3>;
+ txd-delay = <3>;
+ rgmii-enabled = <1>;
+};