diff options
author | Andreas Wiese <aw-openwrt@meterriblecrew.net> | 2020-05-27 15:31:30 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-31 15:44:05 +0200 |
commit | c764c512ac18ce9724b3fb0e476831150817c162 (patch) | |
tree | 1e9d99d246846b38ba5e8ca95160a073ba967c03 /target/linux/ath79/dts/qca9563_tplink_re450-v3.dts | |
parent | 7e513136c63108bf55b38be4d2b65aa00b0d2b26 (diff) | |
download | upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.gz upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.bz2 upstream-c764c512ac18ce9724b3fb0e476831150817c162.zip |
ath79: add support for TP-Link RE450 v3
TP-Link RE450 v3 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.
This device is nearly identical to RE450 v2 besides a modified flash
layout (hence I think force-flashing a RE450v2 image will lead to at
least loss of MAC address).
Specification:
- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button-
- possible UART header on PCB¹
Flash instruction:
Apply factory image in OEM firmware web-gui.
¹ Didn't check to connect as I didn't even manage to connect on
RE450v2 (AFAIU it requires disconnecting some resistors, which I was
too much of a coward to do). But given the similarities to v2 I
think it's the same or very similar procedure (and most likely also
the only way to debrick).
Signed-off-by: Andreas Wiese <aw-openwrt@meterriblecrew.net>
[remove dts-v1 and compatible in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/qca9563_tplink_re450-v3.dts')
-rw-r--r-- | target/linux/ath79/dts/qca9563_tplink_re450-v3.dts | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts new file mode 100644 index 0000000000..f85f02428b --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_re450-v3.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9563_tplink_re450.dtsi" + +/ { + compatible = "tplink,re450-v3", "qca,qca9563"; + model = "TP-Link RE450 v3"; +}; + +&partitions { + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + info: partition@20000 { + label = "info"; + reg = <0x020000 0x002000>; + read-only; + }; + + partition@22000 { + label = "partition-table"; + reg = <0x022000 0x002000>; + read-only; + }; + + partition@24000 { + label = "info2"; + reg = <0x024000 0x00a000>; + read-only; + }; + + partition@2e000 { + label = "config"; + reg = <0x02e000 0x022000>; + read-only; + }; + + partition@50000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x050000 0x7a0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; |