diff options
author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-04-24 02:22:44 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-17 21:03:30 +0200 |
commit | a0ef42e77c367312df7edc78dbd0d18a3faf9808 (patch) | |
tree | d4959e3bf708713517eca3289e39f5bc744d6fe2 /target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts | |
parent | 0486641849f4ecb6a29d0f5a9ec2b900380ba2b7 (diff) | |
download | upstream-a0ef42e77c367312df7edc78dbd0d18a3faf9808.tar.gz upstream-a0ef42e77c367312df7edc78dbd0d18a3faf9808.tar.bz2 upstream-a0ef42e77c367312df7edc78dbd0d18a3faf9808.zip |
ath79: add support for Ubiquiti PowerBeam 5AC 500
The Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna.
Specifications:
- SoC: Qualcomm Atheros QCA9558
- RAM: 128 MB DDR2
- Flash: 16 MB SPI NOR (mx25l12805d)
- Ethernet: 1x 10/100/1000 Mbps Atheros 8031, 24 Vdc PoE-in
- WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
- Buttons: 1x (reset)
- LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue
- UART: not tested
Not supported:
- RSSI LEDs (probably through 74HC595 chip)
Installation from stock airOS firmware:
- Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at
https://openwrt.org/toh/ubiquiti/common
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Diffstat (limited to 'target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts')
-rw-r--r-- | target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts b/target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts new file mode 100644 index 0000000000..c41b9e5423 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "qca955x_ubnt_xc.dtsi" + +/ { + compatible = "ubnt,powerbeam-5ac-500", "ubnt,xc", "qca,qca9558"; + model = "Ubiquiti PowerBeam 5AC 500"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + phy4: ethernet-phy@4 { + phy-mode = "sgmii"; + reg = <4>; + at803x-override-sgmii-link-check; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + phy-mode = "sgmii"; + phy-handle = <&phy4>; +}; |