aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/qca9558_ocedo_koala.dts
diff options
context:
space:
mode:
authorWeijie Gao <hackpascal@gmail.com>2018-12-29 17:22:32 +0800
committerMathias Kresin <dev@kresin.me>2018-12-30 20:08:13 +0100
commitabc7ed2c58860fc1363129efbe9e8c60f81a802c (patch)
tree972d250921df3ca509c8a98aa514a0e774c1e5b6 /target/linux/ath79/dts/qca9558_ocedo_koala.dts
parentfd35c5b205e7583628472b607ee4eb41c6d1b6d5 (diff)
downloadupstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.gz
upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.bz2
upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.zip
ath79: add support for D-Link DIR-859 A1
Hardware spec of DIR-859 A1: SoC: QCA9563 DRAM: 64MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9880 USB is supported on the PCB but not connected. Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Weijie Gao <hackpascal@gmail.com> [squash commits, use common seama recipes, sync factory image recipe with ramips version] Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ath79/dts/qca9558_ocedo_koala.dts')
0 files changed, 0 insertions, 0 deletions