aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
diff options
context:
space:
mode:
authorSven Roederer <devel-sven@geroedel.de>2020-06-22 23:05:51 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-08-12 14:03:17 +0200
commitb2e1f7101d877ce09f8bcb1732b20168051116b6 (patch)
tree281dc442a1bdb73008a5cc3076b92cf83242862a /target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
parent7a705c067f729e1f6edf4945985ec4f5761ca0ab (diff)
downloadupstream-b2e1f7101d877ce09f8bcb1732b20168051116b6.tar.gz
upstream-b2e1f7101d877ce09f8bcb1732b20168051116b6.tar.bz2
upstream-b2e1f7101d877ce09f8bcb1732b20168051116b6.zip
ath79: add support for MikroTik RouterBOARD 921GS-5HPacD-15s
The MikroTik RouterBOARD 921GS-5HPacD-15s (mANTBox 15s) is an outdoor antenna for 5 GHz with an built-in router. This ports the board from ar71xx. See https://mikrotik.com/product/RB921GS-5HPacD-15S for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9892 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in - SFP: 1x host Working: - NAND storage detection - Ethernet - Wireless - 1x user LED (blinks during boot, sysupgrade) - Reset button - Sysupgrade Untested: - SFP cage (probably not working) Installation (untested): - Boot initramfs image via TFTP and then flash sysupgrade image As the embedded RB921-pcb is a stripped down version of the RB922 this patch adds a common dtsi for this series and includes this to the final dts-files. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> [move ath10k-leds closer to ath10k definition in DTS files] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi')
-rw-r--r--target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi131
1 files changed, 131 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
new file mode 100644
index 0000000000..c48f997e89
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca955x.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-upgrade = &led_user;
+ serial0 = &uart;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_user: user {
+ label = "mikrotik:green:user";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_nand_power {
+ gpio-export,name = "mikrotik:power:nand";
+ gpio-export,output = <0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&phy4>;
+ pll-data = <0x8f000000 0xa0000101 0xa0001313>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "routerboot";
+ reg = <0x0 0x0>;
+ read-only;
+ };
+
+ hard_config: hard_config {
+ read-only;
+ };
+
+ bios {
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ nand-ecc-mode = "soft";
+ qca,nand-swap-dma;
+ qca,nand-scan-fixup;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "booter";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x0040000 0x03c0000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x0400000 0x7c00000>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};