diff options
author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-08-16 17:08:28 +0900 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-08-16 21:20:57 +0200 |
commit | ff4bc483fc5ff90c9b7a188236bb072351f201bd (patch) | |
tree | 89db91e26b939bf5862d8311e74b882def296ed4 /target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts | |
parent | 94ee5e3d1d2a473d1124b8d59fbe4f8c9442996a (diff) | |
download | upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.tar.gz upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.tar.bz2 upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.zip |
ath79: add support for I-O DATA WN-AC1167DGR
I-O DATA WN-AC1167DGR is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.
Specification:
- Qualcomm Atheros QCA9557
- 128 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz wifi
- 2.4 GHz: SoC internal
- 5 GHz: QCA988x
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 6x keys (4x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- 115200n8
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AC1167DGR
2. Connect power cable to WN-AC1167DGR and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts')
-rw-r--r-- | target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts | 209 |
1 files changed, 1 insertions, 208 deletions
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts index 67db0ee875..3eedec72e7 100644 --- a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts +++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts @@ -4,216 +4,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include "qca9557.dtsi" +#include "qca9557_iodata_wn-ac-dgr.dtsi" / { compatible = "iodata,wn-ac1600dgr2", "qca,qca9557"; model = "I-O DATA WN-AC1600DGR2"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "wn-ac1600dgr2:green:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - copy { - label = "wn-ac1600dgr2:green:copy"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - eco { - label = "wn-ac1600dgr2:green:eco"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wlan5g { - label = "wn-ac1600dgr2:green:wlan5g"; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "phy0tpt"; - }; - - wlan2g { - label = "wn-ac1600dgr2:green:wlan2g"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "phy1tpt"; - }; - - notification { - label = "wn-ac1600dgr2:amber:notification"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - button_eco { - label = "eco"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - debounce-interval = <60>; - }; - - auto { - label = "auto"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - }; - - button_copy { - label = "copy"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - debounce-interval = <60>; - }; - - wps { - label = "wps"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - }; - - reset { - label = "reset"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - }; - - router { - label = "router"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - }; - }; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x030000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x030000 0x010000>; - read-only; - }; - - partition@40000 { - label = "firmware"; - reg = <0x040000 0xe50000>; - }; - - partition@e90000 { - label = "manufacture"; - reg = <0xe90000 0x100000>; - read-only; - }; - - partition@f90000 { - label = "backup"; - reg = <0xf90000 0x010000>; - read-only; - }; - - partition@fa0000 { - label = "storage"; - reg = <0xfa0000 0x050000>; - read-only; - }; - - art: partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - - qca,ar8327-initvals = < - 0x04 0x87600000 /* PORT0 PAD MODE CTRL */ - 0x7c 0x0000007e /* PORT0_STATUS */ - >; - }; -}; - -ð0 { - status = "okay"; - - pll-data = <0x56000000 0x00000101 0x00001616>; - phy-handle = <&phy0>; -}; - -&pcie1 { - status = "okay"; - - wifi@0,0 { - compatible = "pci168c,003c"; - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; - -&uart { - status = "okay"; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&wmac { - status = "okay"; - qca,no-eeprom; }; |