diff options
author | Andrew Cameron <apcameron@softhome.net> | 2019-10-25 20:29:36 -0500 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-11-06 13:37:40 +0100 |
commit | bae0d47f2e36376d2876bc4d5557e3e11f80f2fb (patch) | |
tree | e93c9fcf7d01d5a80afde9dcdfd8c94ff5cf9192 /target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts | |
parent | d2b9333ea90ed89069879b4a676211c72c859f9b (diff) | |
download | upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.gz upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.bz2 upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.zip |
ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP
Specifications:
SoC: Qualcomm Atheros QCA9533 (650MHz)
RAM: 64MB
Storage: 8 MB SPI NOR
Wireless: 2.4GHz N based built into SoC 2x2
Ethernet: 2x 100/10 Mbps, integrated into SoC
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
This also applies some minor changes to the common DTSI:
- use &wmac for label-mac-device, as this one is actually set up in
common DTSI
- move ð0 to parent DTSI
- fix several leading spaces, added/removed newlines
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[DTS style fixes/improvements, updated commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts')
-rw-r--r-- | target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts new file mode 100644 index 0000000000..dd90eb1c7d --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533_tplink_cpexxx.dtsi" + +/ { + compatible = "tplink,cpe220-v3", "qca,qca9533"; + model = "TP-Link CPE220 v3"; +}; + +&leds { + lan0 { + label = "tp-link:green:lan0"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&info 0x8>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <0>; + switch-only-mode = <1>; + }; +}; |