diff options
author | Andrew Cameron <apcameron@softhome.net> | 2019-10-25 20:29:36 -0500 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-11-06 13:37:40 +0100 |
commit | bae0d47f2e36376d2876bc4d5557e3e11f80f2fb (patch) | |
tree | e93c9fcf7d01d5a80afde9dcdfd8c94ff5cf9192 /target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi | |
parent | d2b9333ea90ed89069879b4a676211c72c859f9b (diff) | |
download | upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.gz upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.bz2 upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.zip |
ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP
Specifications:
SoC: Qualcomm Atheros QCA9533 (650MHz)
RAM: 64MB
Storage: 8 MB SPI NOR
Wireless: 2.4GHz N based built into SoC 2x2
Ethernet: 2x 100/10 Mbps, integrated into SoC
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
This also applies some minor changes to the common DTSI:
- use &wmac for label-mac-device, as this one is actually set up in
common DTSI
- move ð0 to parent DTSI
- fix several leading spaces, added/removed newlines
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[DTS style fixes/improvements, updated commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi')
-rw-r--r-- | target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi | 130 |
1 files changed, 5 insertions, 125 deletions
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi index 5b273d4737..cb329a9a66 100644 --- a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi +++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi @@ -1,135 +1,15 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "qca9533_tplink_cpexxx.dtsi" -#include "qca953x.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - label-mac-device = ð0; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - link1 { - label = "tp-link:green:link1"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - link2 { - label = "tp-link:green:link2"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - - link3 { - label = "tp-link:green:link3"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - led_system: link4 { - label = "tp-link:green:link4"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset_button { - label = "Reset button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - label = "u-boot"; - reg = <0x000000 0x020000>; - read-only; - }; - - partition@20000 { - label = "partition-table"; - reg = <0x020000 0x10000>; - read-only; - }; - - info: partition@30000 { - label = "info"; - reg = <0x030000 0x10000>; - read-only; - }; - - partition@40000 { - label = "firmware"; - reg = <0x040000 0x780000>; - compatible = "tplink,firmware"; - }; - - config: partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x30000>; - read-only; - }; - - art: partition@7f0000 { - label = "art"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; +&leds { + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; -ð0 { - status = "okay"; - phy-handle = <&swphy4>; - mtd-mac-address = <&info 0x8>; -}; - ð1 { compatible = "syscon", "simple-mfd"; }; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&info 0x8>; -}; |