diff options
author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-06-09 12:30:35 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-12 14:03:17 +0200 |
commit | 7a705c067f729e1f6edf4945985ec4f5761ca0ab (patch) | |
tree | 45db249607e55022c73cfbd994e3148173b63e0c /target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi | |
parent | ed19ba04e89ea102c2fb5431d63e0601936dc448 (diff) | |
download | upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.tar.gz upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.tar.bz2 upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.zip |
ath79: add support for MikroTik RouterBOARD LHG 2nD
The MikroTik RouterBOARD LHG 2nD (sold as LHG 2) is a 2.4 GHz
802.11b/g/n outdoor device with a feed and an integrated dual
polarization grid dish antenna based on the LHG-HB platform.
See https://mikrotik.com/product/lhg_2 for more info.
Specifications:
- SoC: Qualcomm Atheros QCA9533
- RAM: 64 MB
- Storage: 16 MB NOR
- Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 18 dBi antenna
- Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 12-28 Vdc PoE in
- 8 user-controllable LEDs:
· 1x power (blue)
· 1x user (green)
· 1x lan (green)
· 1x wlan (green)
· 4x rssi (green)
Note:
The rssihigh LED is disabled, as it shares GPIO 16 with the reset
button.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[rebase, remove rssiled setup, adjust commit message, add DTSIs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi')
-rw-r--r-- | target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi new file mode 100644 index 0000000000..32cc6d3731 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-16m.dtsi" + +/ { + compatible = "mikrotik,routerboard-lhg-hb", "qca,qca9533"; + model = "MikroTik RouterBOARD LHG-HB platform"; + + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-upgrade = &led_user; + led-running = &led_user; + serial0 = &uart; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_wan_pin>; + + power { + label = "mikrotik:blue:power"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_user: user { + label = "mikrotik:green:user"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "mikrotik:green:lan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "mikrotik:green:wlan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + rssilow { + label = "mikrotik:green:rssilow"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + + rssimediumlow { + label = "mikrotik:green:rssimediumlow"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + rssimediumhigh { + label = "mikrotik:green:rssimediumhigh"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + /* The rssihigh LED GPIO 16 is shared with the reset button, so it remains + unregistered here to avoid conflict. + + rssihigh { + label = "mikrotik:green:rssihigh"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + */ + }; +}; + +ð0 { + compatible = "syscon", "simple-mfd"; +}; + +ð1 { + status = "okay"; + + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + }; +}; + +&pinmux { + led_wan_pin: pinmux_led_wan_pin { + pinctrl-single,bits = <0x4 0x0 0xff>; + }; +}; |