ath79: Add GL.iNet AR-300M-Lite

AR300M-Lite is single-Ethernet variant of the AR300M series
Its eth0 would otherwise be assigned to the WAN interface
making it unreachable firstboot or failsafe.

Installation instructions from OEM (OpenWrt variant):
* Install sysupgrade.bin using OEM's "Advanced" GUI (LuCI),
   * Do not preserve settings
   * Access rebooted device via Ethernet at OpenWrt default address

Add previously missing LED defaults for all three variants;
-nand, -nor, -lite to the definitions in 01_leds

Non-lite variants thanks to Andreas Ziegler
https://patchwork.ozlabs.org/patch/1049396/

Runtime-tested:  GL.iNet AR300M-Lite

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>

1 files changed, 0 insertions, 34 deletions

diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
index 9e78f83a76..26c30f2b72 100644
--- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
@@ -8,42 +8,8 @@
 };
 
 &spi {
-	status = "okay";
 	num-cs = <1>;
 
-	flash@0 {
-		compatible = "winbond,w25q128", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x040000>;
-				read-only;
-			};
-
-			partition@1 {
-				label = "u-boot-env";
-				reg = <0x040000 0x010000>;
-			};
-
-			partition@2 {
-				label = "reserved";
-				reg = <0x050000 0xfa0000>;
-			};
-
-			art: partition@3 {
-				label = "art";
-				reg = <0xff0000 0x010000>;
-			};
-		};
-	};
-
 	flash@1 {
 		compatible = "spinand,mt29f";
 		reg = <1>;