diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-07-28 12:20:26 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-03-20 12:22:18 +0100 |
commit | 456e1c60d61c76f21c8b8fc02473b5347c8ff247 (patch) | |
tree | 1509d9546929ea78fda43dc87a486a0f6877609a /target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts | |
parent | e7fae8fc970bfe0c5aaa370d314ffa6713c72328 (diff) | |
download | upstream-456e1c60d61c76f21c8b8fc02473b5347c8ff247.tar.gz upstream-456e1c60d61c76f21c8b8fc02473b5347c8ff247.tar.bz2 upstream-456e1c60d61c76f21c8b8fc02473b5347c8ff247.zip |
ath79: add support for TP-Link WDR3500 v1
Hardware:
SoC: AR9344
CPU: 560 MHz
Flash: 8 MiB
RAM: 128 MiB
WiFi: Atheros AR9340 2.4GHz 802.11bgn
Atheros AR9300 5GHz 802.11an
Ethernet: AR934X built-in switch, WAN on separate physical interface
USB: 1x 2.0
Flash instruction (WebUI):
Download *-factory.bin image and upload it via the firmwary upgrade
function of the stock firmware WebUI.
Flash instruction (TFTP):
1. Set PC to fixed ip address 192.168.0.66
2. Download *-factory.bin image and rename it to
wdr3500v1_tp_recovery.bin
3. Start a tftp server with the image file in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[removed stray newline]
Signed-off-by: David Bauer <mail@david-bauer.net>
(backported from commit fbbb4eb8b41d59b38f41fe382c6e4108a36aa909)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts')
-rw-r--r-- | target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts b/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts new file mode 100644 index 0000000000..fbe10752e7 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_tl-wdrxxxx.dtsi" + +/ { + model = "TP-Link TL-WDR3500 v1"; + compatible = "tplink,tl-wdr3500-v1", "qca,ar9344"; +}; + +&leds { + usb { + label = "tp-link:green:usb"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port>; + }; +}; + +&gpio { + usb_power { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "tp-link:power:usb"; + }; +}; + +&pinmux { + pmx_led_wan_lan: pinmux_led_wan_lan { + pinctrl-single,bits = <0x10 0x2c2d0000 0xffff0000>, + <0x14 0x292a2b 0xffffff>; + }; +}; + +&builtin_switch { + pinctrl-names = "default"; + pinctrl-0 = <&pmx_led_wan_lan>; +}; + +&usb { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&ath9k { + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; +}; + +&wmac { + mtd-mac-address = <&uboot 0x1fc00>; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <0>; + switch-only-mode = <1>; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <2>; +}; |