diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-11-22 11:50:00 +0100 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-11-23 12:03:49 +0100 |
commit | 226bc91109c814b3577b1b126f4ab420c868d5a8 (patch) | |
tree | 08cae42d96acb925ce6a5b23dab7f74a4287afb5 /target/linux/ath79/dts/ar9344_tplink_cpe.dtsi | |
parent | 591a06316d028c2a56642dceba105490f7f82ffa (diff) | |
download | upstream-226bc91109c814b3577b1b126f4ab420c868d5a8.tar.gz upstream-226bc91109c814b3577b1b126f4ab420c868d5a8.tar.bz2 upstream-226bc91109c814b3577b1b126f4ab420c868d5a8.zip |
ath79: improve TP-Link CPE DTSI names for ar9344 SOC
The initial DTSI names for the TP-Link CPE devices have become
quite confusing, as several non-V1 devices now use the *-v1.dtsi,
the *cpe510-v1.dts does not use the cpe510.dtsi, etc.
This introduces a new naming scheme based on whether devices have
one or two ports, which should be easier to grasp.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/ar9344_tplink_cpe.dtsi')
-rw-r--r-- | target/linux/ath79/dts/ar9344_tplink_cpe.dtsi | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi new file mode 100644 index 0000000000..d002dfeb3c --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9344.dtsi" + +/ { + aliases { + label-mac-device = &wmac; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = <KEY_RESTART>; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "partition-table"; + reg = <0x020000 0x010000>; + read-only; + }; + + info: partition@30000 { + label = "info"; + reg = <0x030000 0x010000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x040000 0x780000>; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x000000 0x200000>; + }; + + partition@200000 { + label = "rootfs"; + reg = <0x200000 0x580000>; + }; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x030000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x08>; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&info 0x8>; +}; |