aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts
diff options
context:
space:
mode:
authorRoger Pueyo Centelles <roger.pueyo@guifi.net>2020-03-12 11:37:10 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-04-27 23:17:30 +0200
commite210fe91b186ba5b229fd64d165a631810d60dac (patch)
tree08bafb66e4939c7a39db014e558e2f539f2e7996 /target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts
parentf0435d53439bdf2a329d2145e40b8e8e65508754 (diff)
downloadupstream-e210fe91b186ba5b229fd64d165a631810d60dac.tar.gz
upstream-e210fe91b186ba5b229fd64d165a631810d60dac.tar.bz2
upstream-e210fe91b186ba5b229fd64d165a631810d60dac.zip
ath79: add support for Ubiquiti PowerBeam 5AC Gen2
The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac 5 GHz bridge with a radio feed and a dish antenna. The device is hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs. Specifications: - SoC: Qualcomm Atheros AR9342 rev 2 - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR (mx25l12805d) - Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff - WiFi 2.4 GHz: Atheros AR9340 (SoC-based) - Buttons: 1x (reset) - LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue. - UART: not tested Installation from stock airOS firmware: - Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [changed device name in commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts')
-rw-r--r--target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts66
1 files changed, 66 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts
new file mode 100644
index 0000000000..6b60ed256e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "ar9342_ubnt_wa.dtsi"
+
+/ {
+ compatible = "ubnt,powerbeam-5ac-gen2", "ubnt,wa", "qca,ar9342";
+ model = "Ubiquiti PowerBeam 5AC Gen2";
+
+ aliases {
+ led-boot = &led_rssi3;
+ led-failsafe = &led_rssi3;
+ led-upgrade = &led_rssi3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi0 {
+ label = "ubnt:blue:rssi0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "ubnt:blue:rssi1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "ubnt:blue:rssi2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_rssi3: rssi3 {
+ label = "ubnt:blue:rssi3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};