diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-18 13:49:15 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-21 11:34:55 +0200 |
commit | eb531337a779a48a2d17bc66f0d222325d6c1563 (patch) | |
tree | 4d114cd671dadb319150d037c7a9b3a715d0bae8 /target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi | |
parent | 14ae431c836d81830a510ebed0937d862491a058 (diff) | |
download | upstream-eb531337a779a48a2d17bc66f0d222325d6c1563.tar.gz upstream-eb531337a779a48a2d17bc66f0d222325d6c1563.tar.bz2 upstream-eb531337a779a48a2d17bc66f0d222325d6c1563.zip |
ath79: add support for TP-Link TL-WR710N v2.1
This adds support for the TP-Link TL-WR710N v2.1. It is basically a
re-issue of the v1.2.
Specifications:
SoC: Atheros AR9331
CPU: 400 MHz
Flash: 8 MiB
RAM: 32 MiB
WiFi: 2.4 GHz b/g/n
Ethernet: 2x 100M ports
USB: 1x 2.0
The only difference from the v1 is the TP-Link hardware ID/revision.
Attention:
The TL-WR710N v2.0 (!) has only 4 MB flash and cannot be flashed with
this image. It has a different TPLINK_HWREV, so accidental flashing
of the factory image should be impossible without additional measures.
Unfortunately, the v2.0 in ar71xx has the same board name, so sysupgrade
from ar71xx v2.0 into ath79 v1/v2.1 will not be prevented, but will brick
the device.
Flashing instruction:
Upload the factory image via the OEM firmware GUI upgrade mechanism.
Further notes:
To make implementation easier if somebody desires to port the 4M v2.0,
this already creates two DTSI files.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Fabian Eppig <fabian@eppig.de>
Diffstat (limited to 'target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi')
-rw-r--r-- | target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi new file mode 100644 index 0000000000..e37c43f4a7 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9331.dtsi" + +/ { + aliases { + serial0 = &uart; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "tl-wr710n:green:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb_vbus: regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; +}; + +&uart { + status = "okay"; +}; + +&usb { + status = "okay"; + + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; |