ath79: fix boardname of GL.iNet GL-AR150

This device is called GL-AR150, therefore rename the board
to 'gl-ar150'

Signed-off-by: Paul Wassi <p.wassi@gmx.at>

1 files changed, 0 insertions, 145 deletions

diff --git a/target/linux/ath79/dts/ar9330_glinet_ar150.dts b/target/linux/ath79/dts/ar9330_glinet_ar150.dts
deleted file mode 100644
index fbc3acdd1b..0000000000
--- a/target/linux/ath79/dts/ar9330_glinet_ar150.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9330.dtsi"
-
-/ {
-	model = "GL.iNet GL-AR150";
-	compatible = "glinet,ar150", "qca,ar9330";
-
-	aliases {
-		serial0 = &uart;
-		led-boot = &wlan;
-		led-failsafe = &wlan;
-		led-upgrade = &wlan;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wlan: wlan {
-			label = "gl-ar150:orange:wlan";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		lan {
-			label = "gl-ar150:green:lan";
-			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "gl-ar150:green:wan";
-			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		manual {
-			label = "manual";
-			linux,code = <BTN_7>;
-			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		auto {
-			label = "auto";
-			linux,code = <BTN_8>;
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-};
-
-&usb {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb_phy {
-	status = "okay";
-	gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
-	num-chipselects = <1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <104000000>;
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x040000>;
-				read-only;
-			};
-
-			partition@1 {
-				label = "u-boot-env";
-				reg = <0x040000 0x010000>;
-			};
-
-			partition@2 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x050000 0xfa0000>;
-			};
-
-			art: partition@3 {
-				label = "ART";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x0>;
-};
-
-&eth1 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x0>;
-
-	gmac-config {
-		device = <&gmac>;
-
-		switch-phy-addr-swap = <0>;
-		switch-phy-swap = <0>;
-	};
-};
-
-&wmac {
-	status = "okay";
-	mtd-cal-data = <&art 0x1000>;
-	mtd-mac-address = <&art 0x0>;
-};