ath79: add AVM FRITZ!WLAN Repeater 300E

No known issues, everything works fine.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 169 insertions, 0 deletions

diff --git a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
new file mode 100644
index 0000000000..f1ad138f43
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7242.dtsi"
+
+/ {
+	compatible = "avm,fritz300e", "qca,ar7242";
+	model = "AVM FRITZ!WLAN Repeater 300E";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "fritz300e:green:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		lan {
+			label = "fritz300e:green:lan";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "fritz300e:green:wlan";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ath9k-leds {
+		compatible = "gpio-leds";
+
+		rssi0 {
+			label = "fritz300e:green:rssi0";
+			gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
+		};
+
+		rssi1 {
+			label = "fritz300e:green:rssi1";
+			gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rssi2 {
+			label = "fritz300e:green:rssi2";
+			gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
+		};
+
+		rssi3 {
+			label = "fritz300e:green:rssi3";
+			gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+		};
+
+		rssi4 {
+			label = "fritz300e:green:rssi4";
+			gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	eth-phy-reset {
+		compatible = "regulator-fixed";
+
+		regulator-name = "eth-phy-reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <300000>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x20000>;
+				label = "urloader";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0xee0000>;
+				label = "firmware";
+			};
+
+			partition@f00000 {
+				reg = <0xf00000 0x80000>;
+				label = "tffs (1)";
+				read-only;
+			};
+
+			partition@f80000 {
+				reg = <0xf80000 0x80000>;
+				label = "tffs (2)";
+				read-only;
+			};
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+
+	ath9k: wifi@0000 {
+		reg = <0x0000 0 0 0 0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		qca,no-eeprom;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "rgmii";
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	pll-data = <0x16000000 0x00000101 0x00001313>;
+};