diff options
| author | Johann Neuhauser <johann@it-neuhauser.de> | 2018-06-16 08:13:09 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-06-16 10:08:51 +0200 |
| commit | 14cb05909a8dc6e42008697b4fe47b8fa00789d8 (patch) | |
| tree | 725dd3d2a12a6f8f0770f9c18a6d7aeaa1f8451c /target/linux/ath79/dts/ar7242_avm_fritz300e.dts | |
| parent | 25ea21d765fd49631ab64bac75bfb98f076483e6 (diff) | |
| download | upstream-14cb05909a8dc6e42008697b4fe47b8fa00789d8.tar.gz upstream-14cb05909a8dc6e42008697b4fe47b8fa00789d8.tar.bz2 upstream-14cb05909a8dc6e42008697b4fe47b8fa00789d8.zip | |
ath79: clean up led config script files for all devices
1. Move all status led definitions out of diag.sh into device dt
as we use here a generic script hook.
2. Encode "phy0ptp" led trigger in dt of device for all ath79 devices.
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
Diffstat (limited to 'target/linux/ath79/dts/ar7242_avm_fritz300e.dts')
| -rw-r--r-- | target/linux/ath79/dts/ar7242_avm_fritz300e.dts | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts index 1dd1698714..07c1f637cb 100644 --- a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts +++ b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts @@ -10,6 +10,10 @@ compatible = "avm,fritz300e", "qca,ar7242"; model = "AVM FRITZ!WLAN Repeater 300E"; + aliases { + led-status = &power; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x4000000>; @@ -32,7 +36,7 @@ leds { compatible = "gpio-leds"; - power { + power: power { label = "fritz300e:green:power"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; default-state = "on"; @@ -46,6 +50,7 @@ wlan { label = "fritz300e:green:wlan"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; }; |