aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/ar7240_tplink.dtsi
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-11 01:31:05 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-11 14:30:58 +0100
commit273e00c4a506c076dddfc51c3c00d4523496f5f4 (patch)
treeb59f37ba14f54d3c72bfc11283e38ef9bd46c7f3 /target/linux/ath79/dts/ar7240_tplink.dtsi
parent9c19c35d1ee3af7dc4f173871ab774d8d30a4e18 (diff)
downloadupstream-273e00c4a506c076dddfc51c3c00d4523496f5f4.tar.gz
upstream-273e00c4a506c076dddfc51c3c00d4523496f5f4.tar.bz2
upstream-273e00c4a506c076dddfc51c3c00d4523496f5f4.zip
ath79: reorganize DTSI for ar7240 TP-Link devices
The current set of TP-Link devices with ar7240 SoC all share the same DTSI file. As the latter is very similar to the definition required for the to-be-supported TP-Link TL-WA devices with ar7240, this patch splits the definitions into a shared part for all TP-Link devices (ar7240_tplink.dtsi) and a file containing the specific setup for the present TL-WR devices (ar7240_tplink_tl-wr.dtsi), equivalent to the former ar7240_tplink_tl-wr74xn-v1.dtsi. While at it, remove unused firmware partition label and rename pinmux_switch_led_pins. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/ar7240_tplink.dtsi')
-rw-r--r--target/linux/ath79/dts/ar7240_tplink.dtsi123
1 files changed, 123 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar7240_tplink.dtsi b/target/linux/ath79/dts/ar7240_tplink.dtsi
new file mode 100644
index 0000000000..de0b36bbf8
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_tplink.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7240.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ label-mac-device = &ath9k;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_switch_led_pins>;
+
+ led_system: system {
+ label = "tp-link:green:system";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ qss {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ reg = <0x20000 0x3d0000>;
+ label = "firmware";
+ };
+
+ art: partition@3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+&eth1 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&uboot 0x1fc00>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pinmux {
+ pinmux_switch_led_pins: switch_led_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+};
+
+&uart {
+ status = "okay";
+};