ath79: add support for Buffalo WZR-600DHP

The hardware of this device seems to be identical to WZR-HP-AG300H.
It was already implemented as a clone in ar71xx.

Specification:
- 680 MHz CPU (Qualcomm Atheros AR7161)
- 128 MiB RAM
- 32 MiB Flash
- WiFi 5 GHz a/n
- WiFi 2.4 GHz b/g/n
- 5x 1000Base-T Ethernet
- 1x USB 2.0

Installation of OpenWRT from vendor firmware:
- Connect to the Web-interface at http://192.168.11.1
- Go to “Administration” → “Firmware Upgrade”
- Upload the OpenWrt factory image

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 2 insertions, 265 deletions

diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
index 43f35683bd..807f76cf17 100644
--- a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
@@ -1,272 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include "ar7161_buffalo_wzr-hp-ag300h.dtsi"
 
 / {
 	compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
-	model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
-
-	aliases {
-		led-boot = &led_diag;
-		led-failsafe = &led_diag;
-		led-upgrade = &led_diag;
-	};
-
-	extosc: ref {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-output-names = "ref";
-		clock-frequency = <40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_diag: diag {
-			label = "buffalo:red:diag";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	ath9k-leds {
-		compatible = "gpio-leds";
-
-		band2g_a {
-			label = "buffalo:amber:band2g";
-			gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "buffalo:green:usb";
-			gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
-			linux,default-trigger = "usbport";
-		};
-
-		band2g_g {
-			label = "buffalo:green:band2g";
-			gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		band5g_g {
-			label = "buffalo:green:band5g";
-			gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		router {
-			label = "buffalo:green:router";
-			gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		movie_engine {
-			label = "buffalo:blue:movie_engine";
-			gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		band5g_a {
-			label = "buffalo:amber:band5g";
-			gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		usb {
-			linux,code = <BTN_2>;
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		aoss {
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		router_auto {
-			linux,code = <BTN_6>;
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		router_off {
-			linux,code = <BTN_5>;
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		movie_engine {
-			linux,code = <BTN_7>;
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-
-	gpio-export {
-		compatible = "gpio-export";
-
-		gpio_usb_power {
-			gpio-export,name = "buffalo:power:usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	flash {
-		compatible = "mtd-concat";
-
-		devices = <&flash0 &flash1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x0040000 0x0010000>;
-				read-only;
-			};
-
-			art: partition@50000 {
-				label = "art";
-				reg = <0x0050000 0x0010000>;
-				read-only;
-			};
-
-			partition@60000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x0060000 0x1f90000>;
-			};
-
-			partition@1ff0000 {
-				label = "user_property";
-				reg = <0x1ff0000 0x0010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	usb_ohci_port: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
-	};
-};
-
-&usb2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	usb_ehci_port: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	ath9k0: wifi@0,11 {
-		compatible = "pci168c,0029";
-		reg = <0x8800 0 0 0 0>;
-		qca,no-eeprom;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	ath9k1: wifi@0,12 {
-		compatible = "pci168c,0029";
-		reg = <0x9000 0 0 0 0>;
-		qca,no-eeprom;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-&pll {
-	clocks = <&extosc>;
-};
-
-&spi {
-	status = "okay";
-
-	num-cs = <2>;
-	cs-gpios = <0>, <0>;
-
-	flash0: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-	};
-
-	flash1: flash@1 {
-		compatible = "jedec,spi-nor";
-		reg = <1>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-		phy-mode = "rgmii";
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x120c>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x520c>;
-	mtd-mac-address-increment = <1>;
-
-	phy-handle = <&phy4>;
+	model = "Buffalo WZR-HP-AG300H";
 };