diff options
| author | Markus Scheck <markus.scheck1@gmail.com> | 2019-03-21 16:43:27 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-04-08 18:37:04 +0200 |
| commit | de2f888024ac58c6137959ea91f65cb6ad098df3 (patch) | |
| tree | 4076d00fbe67b6fa4d65a9594ff86acd78ead23f /target/linux/ath79/base-files | |
| parent | 189aa1748b2655baab54ac5ec45674281dcbb224 (diff) | |
| download | upstream-de2f888024ac58c6137959ea91f65cb6ad098df3.tar.gz upstream-de2f888024ac58c6137959ea91f65cb6ad098df3.tar.bz2 upstream-de2f888024ac58c6137959ea91f65cb6ad098df3.zip | |
ath79: add support for OCEDO Ursus
SOC: Qualcomm Atheros QCA9558
RAM: 128MB
FLASH: 16MB (Macronix MX25L12845EMI-10G)
WLAN1: QCA9558 2.4GHz 802.11bgn 3SS
WLAN2: QCA9880 5GHz 802.11ac 3SS
LED: Power, LAN1, LAN2, 2.4GHz, 5GHz
Serial:Next to SPI Flash,
Pinout is 3V3 - GND - TX - RX (Square Pin is 3V3)
The Serial setting is 115200-8-N-1
INSTALLATION:
1. Serve an OpenWrt ramdisk image named "ursus.bin".
Set your IP-address to 192.168.100.8/24.
2. Connect to the serial. Power up the device and interrupt
the boot process.
3. Set the correct bootcmd with
> setenv bootcmd run bootcmd_1
> saveenv
4. Run
> tftpboot 0x81000000 ursus.bin
> bootm 0x81000000
5. Wait for OpenWrt to boot up.
6. Transfer OpenWrt sysupdate image and flash via sysupgrade.
Signed-off-by: Markus Scheck <markus.scheck1@gmail.com>
Tested-by: David Bauer <mail@david-bauer.net>
[whitespace fix, renamed LED labels and SoC type fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/base-files')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 3 |
2 files changed, 4 insertions, 2 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index e0b777da73..e399210b2b 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -79,7 +79,8 @@ ath79_setup_interfaces() ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; devolo,dvl1200e|\ - devolo,dvl1750e) + devolo,dvl1750e|\ + ocedo,ursus) ucidef_set_interface_lan "eth0 eth1" ;; dlink,dir-825-b1) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 8766862bb6..bfddb5f1c3 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -119,7 +119,8 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176) ;; - ocedo,koala) + ocedo,koala|\ + ocedo,ursus) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(mtd_get_mac_binary art 12) ;; |