diff options
| author | Ding Tengfei <dtf@comfast.cn> | 2019-03-21 19:50:01 +0800 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-03-24 01:44:27 +0100 |
| commit | acf149d531c0c263a2869abe09018e7e232a9e41 (patch) | |
| tree | 42410fbfd5e5076c0b62ae0bd55b48641974b6cf /target/linux/ath79/base-files | |
| parent | fcc716e21d7fa07c68bac8886cef122d35fbbc01 (diff) | |
| download | upstream-acf149d531c0c263a2869abe09018e7e232a9e41.tar.gz upstream-acf149d531c0c263a2869abe09018e7e232a9e41.tar.bz2 upstream-acf149d531c0c263a2869abe09018e7e232a9e41.zip | |
ath79: add support for COMFAST CF-E5/E7
COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on
Qualcomm/Atheros QCA9531.
Short specification:
2x 10/100 Mbps Ethernet, with 24v PoE support
64 MB of RAM (DDR2)
16 MB of FLASH (SPI)
2T2R 2.4 GHz, 802.11b/g/n
built-in 1x 3 dBi antennas
output power (max): 80 mW (19 dBm)
Qucetel EC20 LTE MODULE(1x external detachable antenna)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Ding Tengfei <dtf@comfast.cn>
[commit subject fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/base-files')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 8 | ||||
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 21 | ||||
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/03_gpio_switches | 6 |
3 files changed, 25 insertions, 10 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index f7a904967d..68cff4b4b0 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -47,6 +47,14 @@ comfast,cf-e120a-v3) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100" ;; +comfast,cf-e5) + ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02" + ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth0" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100" + ;; dlink,dir-859-a1) ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20" ;; diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 13dce9aa58..a328ef36e9 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -65,6 +65,17 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan" ;; + comfast,cf-e5|\ + glinet,gl-ar150|\ + glinet,gl-ar300m-nand|\ + glinet,gl-ar300m-nor|\ + glinet,gl-x750|\ + tplink,tl-wr810n-v1|\ + tplink,tl-wr810n-v2|\ + ubnt,routerstation|\ + yuncore,a770) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ;; devolo,dvl1200e|\ devolo,dvl1750e) ucidef_set_interface_lan "eth0 eth1" @@ -98,16 +109,6 @@ ath79_setup_interfaces() etactica,eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; - glinet,gl-ar150|\ - glinet,gl-ar300m-nand|\ - glinet,gl-ar300m-nor|\ - glinet,gl-x750|\ - tplink,tl-wr810n-v1|\ - tplink,tl-wr810n-v2|\ - ubnt,routerstation|\ - yuncore,a770) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; glinet,gl-ar750s) ucidef_add_switch "switch0" \ "0@eth0" "2:lan:2" "3:lan:1" "1:wan" diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches index dc5cbf6e9c..c852b77d79 100755 --- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches @@ -10,6 +10,12 @@ board_config_update board=$(board_name) case "$board" in +comfast,cf-e5) + ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1" + ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1" + ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1" + ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1" + ;; dlink,dir-825-c1|\ dlink,dir-835-a1) ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0" |