treewide: convert MAC address location offsets to hexadecimal

This changes the offsets for the MAC address location in
mtd_get_mac_binary* and mtd_get_mac_text to hexadecimal notation.

This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-mac-address in DTS files.

(e.g. 0x1006 and 0x5006 are much more useful than 4102 and 20486)

Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

4 files changed, 29 insertions, 29 deletions

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 99b9d421f4..c9261f3556 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -315,13 +315,13 @@ ath79_setup_macs()
 		wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
 		;;
 	dlink,dir-825-b1)
-		lan_mac=$(mtd_get_mac_text "caldata" 65440)
-		wan_mac=$(mtd_get_mac_text "caldata" 65460)
+		lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
+		wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)
 		;;
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1)
-		lan_mac=$(mtd_get_mac_text "mac" 4)
-		wan_mac=$(mtd_get_mac_text "mac" 24)
+		lan_mac=$(mtd_get_mac_text "mac" 0x4)
+		wan_mac=$(mtd_get_mac_text "mac" 0x18)
 		;;
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\
@@ -334,7 +334,7 @@ ath79_setup_macs()
 		;;
 	elecom,wrc-1750ghbk2-i|\
 	elecom,wrc-300ghbk2-i)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 4098)" -2)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
 		;;
 	engenius,ecb1750)
 		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
@@ -348,7 +348,7 @@ ath79_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
 		;;
 	engenius,ews511ap)
-		lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
+		lan_mac=$(mtd_get_mac_text "u-boot-env" 0xe9)
 		eth1_mac=$(macaddr_add "$lan_mac" 1)
 		ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
 		ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
@@ -362,13 +362,13 @@ ath79_setup_macs()
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
 	nec,wg800hp)
-		lan_mac=$(mtd_get_mac_text board_data 640)
-		wan_mac=$(mtd_get_mac_text board_data 1152)
+		lan_mac=$(mtd_get_mac_text board_data 0x280)
+		wan_mac=$(mtd_get_mac_text board_data 0x480)
 		;;
 	netgear,wndr3700|\
 	netgear,wndr3700v2|\
 	netgear,wndr3800)
-		lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
+		lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0x0)")
 		;;
 	phicomm,k2t)
 		lan_mac=$(k2t_get_mac "lan_mac")
@@ -379,7 +379,7 @@ ath79_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii devdata wanmac)
 		;;
 	rosinson,wr818)
-		wan_mac=$(mtd_get_mac_binary factory 0)
+		wan_mac=$(mtd_get_mac_binary factory 0x0)
 		lan_mac=$(macaddr_setbit_la "$wan_mac")
 		;;
 	tplink,archer-a7-v5|\
@@ -387,17 +387,17 @@ ath79_setup_macs()
 	tplink,archer-c7-v5|\
 	tplink,tl-wr1043nd-v4|\
 	tplink,tl-wr1043n-v5)
-		base_mac=$(mtd_get_mac_binary info 8)
+		base_mac=$(mtd_get_mac_binary info 0x8)
 		wan_mac=$(macaddr_add "$base_mac" 1)
 		;;
 	tplink,tl-wr941-v2|\
 	tplink,tl-wr941n-v7-cn)
-		base_mac=$(mtd_get_mac_binary u-boot 130048)
+		base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
 		wan_mac=$(macaddr_add "$base_mac" 1)
 		;;
 	trendnet,tew-823dru)
-		lan_mac=$(mtd_get_mac_text mac 4)
-		wan_mac=$(mtd_get_mac_text mac 24)
+		lan_mac=$(mtd_get_mac_text mac 0x4)
+		wan_mac=$(mtd_get_mac_text mac 0x18)
 		;;
 	ubnt,routerstation|\
 	ubnt,routerstation-pro)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index ec597dd1d4..b4c1e1d26d 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -103,7 +103,7 @@ case "$FIRMWARE" in
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1)
 		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 4) 2
+		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 2
 		;;
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\
@@ -128,7 +128,7 @@ case "$FIRMWARE" in
 		;;
 	nec,wg800hp)
 		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac $(mtd_get_mac_text board_data 1664) 2
+		ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 2
 		;;
 	qihoo,c301)
 		ath9k_eeprom_extract "radiocfg" 4096 1088
@@ -156,7 +156,7 @@ case "$FIRMWARE" in
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1)
 		ath9k_eeprom_extract "art" 20480 1088
-		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 24) 1) 2
+		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 2
 		;;
 	ocedo,raccoon|\
 	tplink,tl-wdr3600-v1|\
@@ -212,7 +212,7 @@ case "$FIRMWARE" in
 		;;
 	dlink,dir-825-b1)
 		ath9k_eeprom_extract "caldata" 4096 3768
-		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
+		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 524
 		;;
 	*)
 		ath9k_eeprom_die "board $board is not supported yet"
@@ -229,7 +229,7 @@ case "$FIRMWARE" in
 		;;
 	dlink,dir-825-b1)
 		ath9k_eeprom_extract "caldata" 20480 3768
-		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
+		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 524
 		;;
 	*)
 		ath9k_eeprom_die "board $board is not supported yet"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index ebf5d6d390..be2b6f1891 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -99,7 +99,7 @@ case "$FIRMWARE" in
 	devolo,dvl1750i|\
 	devolo,dvl1750x)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
 		;;
 	dlink,dir-859-a1)
 		ath10kcal_extract "art" 20480 2116
@@ -124,20 +124,20 @@ case "$FIRMWARE" in
 		;;
 	glinet,gl-ar750s)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
 		;;
 	glinet,gl-x750)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0) +2)
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
 		;;
 	nec,wg800hp)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
+		ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
 		;;
 	ocedo,koala|\
 	ocedo,ursus)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
+		ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
 		;;
 	openmesh,om5p-ac-v2)
 		ath10kcal_extract "art" 20480 2116
@@ -153,7 +153,7 @@ case "$FIRMWARE" in
 	tplink,archer-c7-v5|\
 	tplink,archer-c25-v1)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 8) -1)
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
 		;;
 	tplink,archer-c5-v1|\
 	tplink,archer-c7-v2)
@@ -175,7 +175,7 @@ case "$FIRMWARE" in
 		;;
 	tplink,re450-v2)
 		ath10kcal_extract "art" 20480 2116
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 8) +1)
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
 		;;
 	ubnt,unifiac-lite|\
 	ubnt,unifiac-mesh|\
@@ -203,7 +203,7 @@ case "$FIRMWARE" in
 	netgear,ex6400|\
 	netgear,ex7300)
 		ath10kcal_extract "caldata" 20480 12064
-		ath10kcal_patch_mac $(mtd_get_mac_binary caldata 12)
+		ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
 		;;
 	phicomm,k2t)
 		ath10kcal_extract "art" 20480 12064
@@ -217,7 +217,7 @@ case "$FIRMWARE" in
 	tplink,archer-c60-v2|\
 	tplink,archer-c6-v2)
 		ath10kcal_extract "art" 20480 12064
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index d9c3fe7440..3e1cfda84d 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -40,7 +40,7 @@ case "$board" in
 		        mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
 	        # set the 5G interface mac address to WAN MAC + 1
 	        [ "$PHYNBR" -eq 0 ] && \
-		        macaddr_add "$(mtd_get_mac_text mac 24)" 1 > /sys${DEVPATH}/macaddress
+		        macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
                 ;;
 	*)
 		;;