diff options
| author | Django Armstrong <iamdjango@hotmail.com> | 2019-01-20 16:46:42 +0000 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2019-01-26 21:46:33 +0100 |
| commit | 1c2f7b511514d43d8a826b26e09817b2750a2bf4 (patch) | |
| tree | 1d704f9637e879606be61a01a7a3b494e5668ff8 /target/linux/ath79/base-files | |
| parent | 2a4e756085ad88969dbab32961119fe65e3b46b3 (diff) | |
| download | upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.tar.gz upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.tar.bz2 upstream-1c2f7b511514d43d8a826b26e09817b2750a2bf4.zip | |
ath79: add support for Devolo WiFi Pro 1750e
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
1x Atheros AR8033
WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3)
WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3)
BTN: 1x Reset
1x WPS
1x USB eject
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports)
Dupont 4 pin header
Rear RJ45 serial port non-functional
USB: 1x v2.0
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password previously set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: Django Armstrong <iamdjango@hotmail.com>
Diffstat (limited to 'target/linux/ath79/base-files')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 |
2 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 1569b110bd..4197f331b7 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -62,7 +62,8 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan" ;; - devolo,dvl1200e) + devolo,dvl1200e|\ + devolo,dvl1750e) ucidef_set_interface_lan "eth0 eth1" ;; dlink,dir-825-b1) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 76efa24b52..84e43ceee5 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -90,6 +90,7 @@ case "$FIRMWARE" in devolo,dvl1200e|\ devolo,dvl1200i|\ devolo,dvl1750c|\ + devolo,dvl1750e|\ devolo,dvl1750i) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1) |