diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-09-11 20:50:35 +0900 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-09-26 20:35:07 +0200 |
| commit | 81f7bdcb8d6284dbc291b7300c536359c8a528bd (patch) | |
| tree | 133d6ac7fa7933791328631b06acdf2586a37c93 /target/linux/ath79/base-files | |
| parent | 1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27 (diff) | |
| download | upstream-81f7bdcb8d6284dbc291b7300c536359c8a528bd.tar.gz upstream-81f7bdcb8d6284dbc291b7300c536359c8a528bd.tar.bz2 upstream-81f7bdcb8d6284dbc291b7300c536359c8a528bd.zip | |
ath79: add support for Buffalo BHR-4GRV
Buffalo BHR-4GRV is a wired router, based on Atheros AR7242.
Specification:
- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
- 2x 16 MB SPI-NOR flash
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 2x keys
- 1x USB 2.0 Type-A
- UART header on PCB
- JP1: Vcc, GND, TX, RX from reset button side
Flash instruction using factory image:
1. Boot the BHR-4GRV normaly and connect the computer to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware upgrade
4. Wait ~200 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 11 |
1 files changed, 6 insertions, 5 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 54fbe7b350..e608825fb8 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -27,11 +27,7 @@ ath79_setup_interfaces() wd,mynet-wifi-rangeextender) ucidef_set_interface_lan "eth0" ;; - buffalo,wzr-hp-ag300h) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; + buffalo,bhr-4grv|\ buffalo,wzr-hp-g450h) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" @@ -40,6 +36,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0" ;; + buffalo,wzr-hp-ag300h) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" + ;; dlink,dir-825-b1) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ |