ath79: drop, its not ready for a release yet

Signed-off-by: John Crispin <john@phrozen.org>

6 files changed, 0 insertions, 425 deletions

diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
deleted file mode 100644
index 9d42861939..0000000000
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-"glinet,ar150")
-	ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt"
-	;;
-"tplink,tl-wr1043nd-v1")
-	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
-	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
deleted file mode 100644
index 941d2ab511..0000000000
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-ath79_setup_interfaces()
-{
-	local board="$1"
-
-	case "$board" in
-	"ubnt,unifi")
-		ucidef_set_interface_lan "eth0"
-		;;
-
-	"tplink,tl-wr1043nd-v1")
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
-		;;
-	"netgear,wndr3800")
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-
-		ucidef_add_switch_attr "switch0" "blinkrate" 2
-		ucidef_add_switch_port_attr "switch0" 1 led 6
-		ucidef_add_switch_port_attr "switch0" 2 led 9
-		ucidef_add_switch_port_attr "switch0" 5 led 2
-		;;
-	"buffalo,wzr-hp-g450h")
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
-		;;
-	*)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
-	esac
-}
-
-board_config_update
-board=$(board_name)
-ath79_setup_interfaces $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/ath79/base-files/etc/diag.sh b/target/linux/ath79/base-files/etc/diag.sh
deleted file mode 100644
index c9b32df94e..0000000000
--- a/target/linux/ath79/base-files/etc/diag.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/leds.sh
-
-get_status_led() {
-	local board=$(board_name)
-
-	case $board in
-	"glinet,ar150")
-		status_led="gl-ar150:orange:wlan"
-		;;
-	"tplink,tl-wr1043nd-v1")
-		status_led="tp-link:green:system"
-		;;
-	"ubnt,unifi")
-		status_led="ubnt:green:dome"
-		;;
-	esac
-}
-
-set_state() {
-	get_status_led
-
-	case "$1" in
-	preinit)
-		status_led_blink_preinit
-		;;
-	failsafe)
-		status_led_blink_failsafe
-		;;
-	preinit_regular)
-		status_led_blink_preinit_regular
-		;;
-	done)
-		status_led_on
-		;;
-	esac
-}
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
deleted file mode 100644
index fc15caea6f..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
-	echo "ath9k eeprom: " "$*"
-	exit 1
-}
-
-ath9k_eeprom_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local mtd
-
-	mtd=$(find_mtd_chardev $part)
-	[ -n "$mtd" ] || \
-		ath9k_eeprom_die "no mtd device found for partition $part"
-
-	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-		ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath9k-eeprom-pci-0000:00:00.0.bin")
-	case $board in
-	"ubnt,unifi")
-		ath9k_eeprom_extract "art" 4096 2048
-		;;
-	*)
-		ath9k_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
deleted file mode 100644
index 2bbe5923bc..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-
-ath10kcal_die() {
-	echo "ath10cal: " "$*"
-	exit 1
-}
-
-ath10kcal_from_file() {
-	local source=$1
-	local offset=$2
-	local count=$3
-
-	dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-		ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local mtd
-
-	mtd=$(find_mtd_chardev $part)
-	[ -n "$mtd" ] || \
-		ath10kcal_die "no mtd device found for partition $part"
-
-	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
-		ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_patch_mac() {
-	local mac=$1
-
-	[ -z "$mac" ] && return
-
-	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:00:00.0.bin")
-	case $board in
-	openmesh,om5p-ac-v2)
-		ath10kcal_extract "ART" 20480 2116
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-		;;
-	esac
-	;;
-*)
-	exit 1
-	;;
-esac
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index b2b55e64e3..0000000000
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,224 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-
-. /lib/functions/system.sh
-
-PART_NAME=firmware
-RAMFS_COPY_BIN='nandwrite'
-
-CI_BLKSZ=65536
-CI_LDADR=0x80060000
-
-PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
-
-platform_find_partitions() {
-	local first dev size erasesize name
-	while read dev size erasesize name; do
-		name=${name#'"'}; name=${name%'"'}
-		case "$name" in
-			vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem)
-				if [ -z "$first" ]; then
-					first="$name"
-				else
-					echo "$erasesize:$first:$name"
-					break
-				fi
-			;;
-		esac
-	done < /proc/mtd
-}
-
-platform_find_kernelpart() {
-	local part
-	for part in "${1%:*}" "${1#*:}"; do
-		case "$part" in
-			vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin)
-				echo "$part"
-				break
-			;;
-		esac
-	done
-}
-
-platform_find_rootfspart() {
-	local part
-	for part in "${1%:*}" "${1#*:}"; do
-		[ "$part" != "$2" ] && echo "$part" && break
-	done
-}
-
-platform_do_upgrade_combined() {
-	local partitions=$(platform_find_partitions)
-	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
-	local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
-	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
-	local kern_blocks=$(($kern_length / $CI_BLKSZ))
-	local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
-
-	if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
-	   [ ${kern_blocks:-0} -gt 0 ] && \
-	   [ ${root_blocks:-0} -gt 0 ] && \
-	   [ ${erase_size:-0} -gt 0 ];
-	then
-		local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart")
-		local append=""
-		[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
-
-		if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then
-		    ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
-		      dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
-			    mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
-		elif [ -n "$rootfspart" ]; then
-		    dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
-			    mtd write - $kernelpart
-		    dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
-			    mtd -r $append write - $rootfspart
-		fi
-	fi
-	PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
-}
-
-tplink_get_image_hwid() {
-	get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_image_mid() {
-	get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_image_boot_size() {
-	get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_pharos_check_image() {
-	local magic_long="$(get_magic_long "$1")"
-	[ "$magic_long" != "7f454c46" ] && {
-		echo "Invalid image magic '$magic_long'"
-		return 1
-	}
-
-	local model_string="$(tplink_pharos_get_model_string)"
-	local line
-
-	# Here $1 is given to dd directly instead of get_image as otherwise the skip
-	# will take almost a second (as dd can't seek then)
-	#
-	# This will fail if the image isn't local, but that's fine: as the
-	# read loop won't be executed at all, it will return true, so the image
-	# is accepted (loading the first 1.5M of a remote image for this check seems
-	# a bit extreme)
-	dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
-		[ "$line" = "$model_string" ] && break
-	done || {
-		echo "Unsupported image (model not in support-list)"
-		return 1
-	}
-
-	return 0
-}
-
-seama_get_type_magic() {
-	get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-wrgg_get_image_magic() {
-	get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-cybertan_get_image_magic() {
-	get_image "$@" | dd bs=8 count=1 skip=0  2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
-}
-
-cybertan_check_image() {
-	local magic="$(cybertan_get_image_magic "$1")"
-	local fw_magic="$(cybertan_get_hw_magic)"
-
-	[ "$fw_magic" != "$magic" ] && {
-		echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic"
-		return 1
-	}
-
-	return 0
-}
-
-platform_do_upgrade_compex() {
-	local fw_file=$1
-	local fw_part=$PART_NAME
-	local fw_mtd=$(find_mtd_part $fw_part)
-	local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
-	local fw_blocks=$(($fw_length / 65536))
-
-	if [ -n "$fw_mtd" ] &&  [ ${fw_blocks:-0} -gt 0 ]; then
-		local append=""
-		[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
-
-		sync
-		dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
-			mtd $append write - "$fw_part"
-	fi
-}
-
-alfa_check_image() {
-	local magic_long="$(get_magic_long "$1")"
-	local fw_part_size=$(mtd_get_part_size firmware)
-
-	case "$magic_long" in
-	"27051956")
-		[ "$fw_part_size" != "16318464" ] && {
-			echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
-			return 1
-		}
-		;;
-	"68737173")
-		[ "$fw_part_size" != "7929856" ] && {
-			echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
-			return 1
-		}
-		;;
-	esac
-
-	return 0
-}
-
-platform_check_image() {
-	local board=$(board_name)
-	local magic="$(get_magic_word "$1")"
-	local magic_long="$(get_magic_long "$1")"
-
-	[ "$#" -gt 1 ] && return 1
-
-	case "$board" in
-	"ubnt,unifi")
-		[ "$magic" != "2705" ] && {
-			echo "Invalid image type."
-			return 1
-		}
-
-		return 0
-		;;
-	esac
-
-	echo "Sysupgrade is not yet supported on $board."
-	return 1
-}
-
-platform_do_upgrade() {
-	local board=$(board_name)
-
-	case "$board" in
-	*)
-		default_do_upgrade "$ARGV"
-		;;
-	esac
-}
-
-disable_watchdog() {
-	killall watchdog
-	( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
-		echo 'Could not disable watchdog'
-		return 1
-	}
-}
-
-append sysupgrade_pre_upgrade disable_watchdog