aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files
diff options
context:
space:
mode:
authorDing Tengfei <dtf@comfast.cn>2019-03-21 19:50:01 +0800
committerPetr Štetiar <ynezz@true.cz>2019-03-24 01:44:27 +0100
commitacf149d531c0c263a2869abe09018e7e232a9e41 (patch)
tree42410fbfd5e5076c0b62ae0bd55b48641974b6cf /target/linux/ath79/base-files
parentfcc716e21d7fa07c68bac8886cef122d35fbbc01 (diff)
downloadupstream-acf149d531c0c263a2869abe09018e7e232a9e41.tar.gz
upstream-acf149d531c0c263a2869abe09018e7e232a9e41.tar.bz2
upstream-acf149d531c0c263a2869abe09018e7e232a9e41.zip
ath79: add support for COMFAST CF-E5/E7
COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on Qualcomm/Atheros QCA9531. Short specification: 2x 10/100 Mbps Ethernet, with 24v PoE support 64 MB of RAM (DDR2) 16 MB of FLASH (SPI) 2T2R 2.4 GHz, 802.11b/g/n built-in 1x 3 dBi antennas output power (max): 80 mW (19 dBm) Qucetel EC20 LTE MODULE(1x external detachable antenna) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn> [commit subject fix] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/base-files')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network21
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches6
3 files changed, 25 insertions, 10 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index f7a904967d..68cff4b4b0 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -47,6 +47,14 @@ comfast,cf-e120a-v3)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
;;
+comfast,cf-e5)
+ ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth0"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
+ ;;
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 13dce9aa58..a328ef36e9 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -65,6 +65,17 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
;;
+ comfast,cf-e5|\
+ glinet,gl-ar150|\
+ glinet,gl-ar300m-nand|\
+ glinet,gl-ar300m-nor|\
+ glinet,gl-x750|\
+ tplink,tl-wr810n-v1|\
+ tplink,tl-wr810n-v2|\
+ ubnt,routerstation|\
+ yuncore,a770)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ;;
devolo,dvl1200e|\
devolo,dvl1750e)
ucidef_set_interface_lan "eth0 eth1"
@@ -98,16 +109,6 @@ ath79_setup_interfaces()
etactica,eg200)
ucidef_set_interface_lan "eth0" "dhcp"
;;
- glinet,gl-ar150|\
- glinet,gl-ar300m-nand|\
- glinet,gl-ar300m-nor|\
- glinet,gl-x750|\
- tplink,tl-wr810n-v1|\
- tplink,tl-wr810n-v2|\
- ubnt,routerstation|\
- yuncore,a770)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
glinet,gl-ar750s)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index dc5cbf6e9c..c852b77d79 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -10,6 +10,12 @@ board_config_update
board=$(board_name)
case "$board" in
+comfast,cf-e5)
+ ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1"
+ ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1"
+ ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1"
+ ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1"
+ ;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0"