aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2019-03-09 16:31:17 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2019-03-09 16:31:17 +0100
commit6fa94d5e8f8d008dc55eae02ca1b21199d9a8915 (patch)
treef3fd12ce38bacacbb1a2032f65c1778fc56dba8e /target/linux/ath79/base-files
parent24de7c29e5f70863a2962de79521b60bce4dce2f (diff)
downloadupstream-6fa94d5e8f8d008dc55eae02ca1b21199d9a8915.tar.gz
upstream-6fa94d5e8f8d008dc55eae02ca1b21199d9a8915.tar.bz2
upstream-6fa94d5e8f8d008dc55eae02ca1b21199d9a8915.zip
ath79: add support for YunCore A770
YunCore A770 is a ceiling AC750 AP with 2 Fast Ethernet ports, PoE (802.3at) support, based on QCA9531 + QCA9887. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 2x 10/100 Mbps Ethernet (PoE 802.3at support in WAN port) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887), with ext. FEM (SKY85728-11) - 2x regular LED, 1x RGB LED (all driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART header on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to 'Advanced' -> 'Management' -> 'System' and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update 'shadow' file and change hash of root password to something known. - Repack the archive, rename it back to 'bakfile.bin' and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload 'sysupgrade' image and install it (only if previous command succeeded) with command: 'sysupgrade -n -F openwrt-...'. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
3 files changed, 9 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 0fa4bc73bb..a7b6a65e0f 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -171,6 +171,10 @@ wd,mynet-wifi-rangeextender)
ucidef_set_led_rssi "rssimedium" "RSSIMED" "$boardname:blue:rssi-med" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100"
;;
+yuncore,a770)
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 9a7f2d6472..76a1ffba40 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -100,7 +100,8 @@ ath79_setup_interfaces()
glinet,gl-x750|\
tplink,tl-wr810n-v1|\
tplink,tl-wr810n-v2|\
- ubnt,routerstation)
+ ubnt,routerstation|\
+ yuncore,a770)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
glinet,gl-ar750s)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 096064b7ce..53128cad65 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -150,6 +150,9 @@ case "$FIRMWARE" in
ubnt,unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
+ yuncore,a770)
+ ath10kcal_extract "art" 20480 2116
+ ;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")